Toyota / Nissan 2-Pin Crankshaft Position Sensor Connector – OEM 90919-05043 / 7283-6033-30
Direct OEM-specification replacement for the 2-pin crankshaft position (CKP) sensor connector used across Toyota and Nissan platforms. Cross-references OEM part numbers 90919-05043, 19311-BZ020, and Sumitomo housing 7283-6033-30. Available bare or with 15cm pre-wired leads (18AWG).
| OEM Number | Brand |
|---|---|
| 90919-05043 | Toyota connector assembly |
| 19311-BZ020 | Nissan connector assembly |
| 7283-6033-30 | Sumitomo housing |
| Pin | Function | Failure Symptom if Corroded |
|---|---|---|
| 1 | Signal output to ECU (reluctor wheel pulse) | P0335 — CKP circuit malfunction, no-start |
| 2 | Signal ground / shield return | P0336 — CKP range/performance, stall at idle |
| Attribute | Detail |
|---|---|
| Pin Count | 2-Pin |
| OEM Part Numbers | 90919-05043 / 19311-BZ020 / 7283-6033-30 |
| Housing Material | High-temp nylon (PA66), waterproof sealed |
| Wire Option | Bare connector / 15cm pre-wired leads (18AWG) |
| Application | Crankshaft position (CKP) sensor harness |
| Compatible Brands | Toyota, Nissan |
| Code | Description |
|---|---|
| P0335 | Crankshaft position sensor A — circuit malfunction |
| P0336 | Crankshaft position sensor A — range/performance |
| P0337 | Crankshaft position sensor A — circuit low |
| P0338 | Crankshaft position sensor A — circuit high |
Q: My Toyota cranks but won’t start and has P0335 — is it the connector?
A: P0335 with a no-start condition is frequently caused by a corroded CKP sensor connector. The ECU cannot calculate engine position without a valid CKP signal and will not allow fuel injection. Inspect the 2-pin connector before replacing the sensor.
Q: Are terminals included?
A: Yes, terminals are included with all variants.
Be the first to know about new collections and special offers.
2 Pin Connectors
