Toyota 2-Pin 2.2mm ABS / Brake Induction Sensor Connector – OEM 6189-0706
Direct OEM-specification replacement for the Sumitomo 2-pin wire harness connector used on ABS wheel speed sensors and brake induction sensors across Toyota platforms. Cross-references Sumitomo / Toyota OEM part number 6189-0706. Uses the 2.2mm contact series in black nylon housing — designed for ABS sensor applications at each wheel hub where the connector is exposed to road spray, brake dust, heat from the brake disc, and vibration from the suspension.
A failed ABS sensor connector causes the ABS module to lose wheel speed data, triggering ABS and traction control warning lights and disabling the ABS system. This is a roadworthiness issue in most jurisdictions. The connector is frequently damaged during brake pad replacement or wheel bearing replacement when the ABS sensor wiring is not properly supported.
| OEM Number | Application |
|---|---|
| 6189-0706 | Sumitomo 2-pin 2.2mm ABS / brake sensor connector (Toyota) |
| Pin | Function | Failure Symptom if Open |
|---|---|---|
| 1 | ABS sensor signal (+) | ABS warning light, wheel speed data lost |
| 2 | ABS sensor signal (−) / ground | ABS system disabled |
| Attribute | Detail |
|---|---|
| Pin Count | 2-Pin |
| Contact Series | 2.2mm pitch (Sumitomo series) |
| Housing Material | Nylon, black |
| OEM Part Number | 6189-0706 |
| Applications | ABS wheel speed sensor, brake induction sensor |
| Compatible Models | Toyota Corolla / Camry / RAV4 / Hilux / Land Cruiser / Prado |
| Terminal Included | Yes |
Q: Are terminals included?
A: Yes, terminals are included with all variants.
Be the first to know about new collections and special offers.
2 Pin Connectors
