T10 W5W Wedge Bulb Socket – Soft Rubber LED Lamp Holder, 10mm Panel Mount, DC 12V

A pre-wired soft rubber wedge bulb socket engineered for T10 / W5W / 147 wedge-base bulbs across automotive and motorcycle applications. Whether you’re upgrading instrument cluster lighting to LED, replacing a failed license plate socket, or adding auxiliary indicator lights to a custom build, this socket delivers a clean plug-and-play installation without cutting, splicing, or modifying existing wiring.

The soft rubber body flexes easily through tight dashboard cavities and panel channels, while the 10mm panel cutout compatibility ensures a secure, rattle-free fit in standard automotive instrument panel holes. Pre-wired bare leads allow direct connection to your vehicle’s 12V circuit — no additional connectors or adapters required.

Key Specifications

• Compatible Bulbs: T10, W5W, 147 wedge-base (OEM and LED aftermarket)
• Material: Soft rubber (oil-resistant, vibration-damping)
• Panel Cutout Size: 10mm diameter
• Body Length: Approximately 14cm
• Operating Voltage: DC 0V–12V
• Wire Termination: Pre-wired bare leads (direct solder or crimp)
• Applications: Instrument panel lights, dashboard indicators, license plate lights, motorcycle instrument cluster, auxiliary lighting
• Pack Quantity: 1pc, 2pcs, 4pcs, or 6pcs (select above)

Why Soft Rubber?

Unlike rigid plastic sockets, the soft rubber housing absorbs engine and road vibration — a critical advantage in instrument panel and dashboard applications where constant vibration can loosen rigid connectors over time. The flexible body also routes easily through tight panel channels and around obstacles in the dashboard cavity, making installation significantly faster than rigid alternatives.

Features & Benefits

• Vibration-resistant rubber housing: Absorbs engine and road vibration, preventing contact loosening in high-vibration environments
• Pre-wired bare leads: Plug-and-play installation — no cutting or splicing of existing vehicle wiring required
• 10mm panel cutout: Fits standard automotive instrument panel, dashboard, and license plate light holes
• 14cm body length: Sufficient reach for most dashboard, instrument cluster, and panel installations
• DC 12V rated: Compatible with standard 12V automotive and motorcycle electrical systems
• T10 / W5W / 147 universal fit: Works with both OEM incandescent and aftermarket LED upgrade bulbs
• Oil-resistant rubber: Withstands exposure to engine bay oils and fluids without degradation
• Multi-pack options: 1, 2, 4, or 6 pcs — ideal for single repairs or full instrument cluster LED upgrades

Common Applications

• Automotive instrument cluster and dashboard indicator light sockets
• License plate illumination sockets (cars, motorcycles, trailers)
• Motorcycle instrument panel and speedometer lighting
• Interior courtesy and footwell lighting
• Auxiliary indicator and warning light installations
• Custom automotive and motorcycle builds requiring additional T10 sockets
• Replacement for cracked, brittle, or failed OEM plastic lamp sockets

Installation Guide

1. Identify the 10mm panel cutout or existing socket location in your instrument panel or dashboard.
2. Route the 14cm rubber body through the panel channel or cutout.
3. Insert your T10 / W5W / 147 bulb into the socket until it seats securely.
4. Connect the pre-wired bare leads to your vehicle’s 12V circuit (positive and ground) via solder or crimp connector.
5. Verify correct polarity and test the bulb before final assembly.

Frequently Asked Questions

Q: Can I use this with LED T10 bulbs?
A: Yes. This socket is fully compatible with both standard incandescent and LED T10 / W5W / 147 wedge-base bulbs. LED upgrades are a common use case for this socket.

Q: What is the wire gauge of the pre-wired leads?
A: Refer to product images for exact wire gauge. The leads are suitable for direct solder or crimp connection to standard automotive 12V circuits.

Q: Will this fit a 12mm panel hole?
A: This socket is designed for a 10mm panel cutout. A 12mm hole may result in a loose fit. Verify your panel cutout diameter before ordering.

Q: Is this suitable for 24V truck applications?
A: This socket is rated for DC 0V–12V. It is not recommended for 24V systems. Use a 12V-rated bulb and verify your vehicle’s circuit voltage before installation.

Q: How many sockets do I need for a full instrument cluster LED upgrade?
A: Most passenger car instrument clusters use between 4 and 8 T10 sockets. The 6-pack option is ideal for a complete cluster upgrade in a single order.

Package Contents

1×, 2×, 4×, or 6× T10 W5W soft rubber wedge bulb socket with pre-wired bare leads (select quantity above)