Renault / Dacia 6-Pin Ignition Switch & Start Lock Connector – OEM 806014108R / 1544147-1
Direct OEM-specification replacement for the Renault and Dacia 6-pin connector used on ignition switches and start lock (immobiliser) modules. Cross-references OEM part numbers 806014108R, 1544147-1, AL239, 6001549589, and 487004353. Available bare or with 15cm pre-wired leads.
| OEM Number | Brand / Format |
|---|---|
| 806014108R | Renault OEM assembly |
| 1544147-1 | TE Connectivity housing |
| AL239 | Alternate reference |
| 6001549589 | Dacia OEM assembly |
| 487004353 | Alternate cross-reference |
| Pin | Function | Failure Symptom if Corroded |
|---|---|---|
| 1 | +12V permanent power (KL30) | Ignition switch completely dead |
| 2 | +12V ignition power output (KL15) | No power to ignition-switched circuits |
| 3 | Starter relay signal (KL50) | Engine cranks but won’t start / no crank |
| 4 | Immobiliser / UCH signal | Key not recognised, immobiliser active |
| 5 | Accessory power (KL75) | Radio / accessories not working with key in ACC |
| 6 | Ground (KL31) | Ignition switch erratic, intermittent faults |
| Attribute | Detail |
|---|---|
| Pin Count | 6-Pin |
| OEM Part Numbers | 806014108R / 1544147-1 / 6001549589 |
| Housing Material | Nylon (PA66) |
| Wire Option | Bare connector / 15cm pre-wired leads |
| Application | Ignition switch harness, start lock / immobiliser module |
| Compatible Brands | Renault, Dacia |
Q: My Dacia Logan won’t start and the immobiliser light is on — is it the connector?
A: A corroded Pin 4 (immobiliser/UCH signal) in the 6-pin ignition connector causes the UCH to lose communication with the ignition switch, activating the immobiliser. Inspect the connector before replacing the ignition switch or UCH module.
Q: Are terminals included?
A: Yes, terminals are included with all variants.
Be the first to know about new collections and special offers.
6 Pin Connectors
