Nissan 4-Pin Crankshaft Position Sensor & Reversing Radar Connector – OEM 7282-8853-30
Direct OEM-specification replacement for the Nissan 4-pin connector used on crankshaft position (CKP) sensors and reversing radar (PDC) modules. Cross-references Sumitomo part numbers 7282-8853-30 (male/plug side) and 7283-8853-30 (female/socket side). Available bare or with 15cm pre-wired leads.
| OEM Number | Type |
|---|---|
| 7282-8853-30 | Sumitomo — male (plug side, harness) |
| 7283-8853-30 | Sumitomo — female (socket side, sensor/module) |
| Pin | Function | Failure Symptom if Corroded |
|---|---|---|
| 1 | +5V reference voltage from ECU | P0335 — CKP sensor circuit malfunction |
| 2 | Signal output to ECU | P0336 — CKP range/performance, no-start |
| 3 | Signal ground / shield | Erratic RPM signal, stall at idle |
| 4 | Shield / additional ground | Electrical noise on CKP signal |
| Attribute | Detail |
|---|---|
| Pin Count | 4-Pin |
| OEM Part Numbers | 7282-8853-30 / 7283-8853-30 |
| Housing Material | Nylon (PA66) |
| Wire Option | Bare connector / 15cm pre-wired leads |
| Application | Crankshaft position sensor, reversing radar module |
| Compatible Brands | Nissan, Infiniti |
| Code | Description |
|---|---|
| P0335 | Crankshaft position sensor A — circuit malfunction |
| P0336 | Crankshaft position sensor A — range/performance |
| P0338 | Crankshaft position sensor A — circuit high |
Q: My Nissan cranks but won’t start and has P0335 — is it the connector?
A: P0335 with a no-start condition on Nissan vehicles is frequently caused by a corroded CKP sensor connector rather than a failed sensor. The ECU cannot calculate engine position without a valid CKP signal and will not allow injection. Inspect the 4-pin connector before replacing the sensor.
Q: Are terminals included?
A: Yes, terminals are included with all variants.
Be the first to know about new collections and special offers.
4 Pin Connectors
