Hyundai / Kia 2-Pin ABS Wheel Speed & Turn Signal Connector – OEM MG641221-5 / MG651092-5
Direct OEM-specification replacement for the Hyundai and Kia 2-pin connector used on ABS wheel speed sensors and front turn signal lights. Cross-references OEM part numbers MG641221-5 and MG651092-5. Available bare or with 15cm pre-wired leads.
| OEM Number | Application |
|---|---|
| MG641221-5 | Hyundai connector housing |
| MG651092-5 | Kia connector housing (alternate) |
| Pin | Function (ABS Sensor) | Function (Turn Signal) | Failure Symptom |
|---|---|---|---|
| 1 | +12V power / signal to ABS sensor | +12V switched power to turn signal | C1200–C1203 / turn signal out |
| 2 | Signal ground / return to ABS ECU | Ground / chassis earth | ABS warning light / flickering signal |
| Attribute | Detail |
|---|---|
| Pin Count | 2-Pin |
| OEM Part Numbers | MG641221-5 / MG651092-5 |
| Housing Material | Nylon (PA66), waterproof sealed |
| Wire Option | Bare connector / 15cm pre-wired leads |
| Application | ABS wheel speed sensor harness, front turn signal harness |
| Compatible Brands | Hyundai, Kia |
| Code | Description |
|---|---|
| C1200 | ABS — right front wheel speed sensor circuit fault |
| C1201 | ABS — left front wheel speed sensor circuit fault |
| C1202 | ABS — right rear wheel speed sensor circuit fault |
| C1203 | ABS — left rear wheel speed sensor circuit fault |
Q: My Hyundai ABS warning light is on and I have C1201 — is it the connector?
A: C1200–C1203 ABS wheel speed sensor faults on Hyundai/Kia are frequently caused by a corroded 2-pin connector at the affected wheel rather than a failed sensor. Inspect the connector before replacing the ABS sensor.
Q: Are terminals included?
A: Yes, terminals are included with all variants.
Be the first to know about new collections and special offers.
2 Pin Connectors
