Deutsch DT06-4S-C017 Unsealed 4-Pin Female Connector – DT Series

The DT06-4S-C017 is the unsealed 4-pin female socket housing from Deutsch's industry-standard DT connector series. The "-C017" suffix designates a specific color or keying variant within the DT06-4S family, used to prevent mis-mating in multi-connector harness assemblies. This connector is widely used in motorcycle, powersports, agricultural, and industrial wiring applications where a robust, vibration-resistant connection is required without the need for full IP67 sealing.

Key Specifications

• Part Number: DT06-4S-C017
• Series: Deutsch DT (unsealed variant)
• Pin Count: 4
• Gender: Female socket (mates with DT04-4P-C017 male plug)
• Terminal Size: Size 16 (accepts 16 AWG / 1.0 mm² wire)
• Housing Material: Glass-filled nylon (PA66)
• Operating Temperature: -55°C to +125°C
• Seal Type: Unsealed (no wire seals – for dry, protected environments)
• Locking: Positive latch with wedgelock (W4S)

DT Series Naming Decoded

• DT – Deutsch DT series (standard automotive/industrial)
• 06 – Female socket housing (04 = male plug)
• 4S – 4-position socket
• C017 – Color/keying code (prevents mis-mating with standard DT06-4S)

Applications

• Motorcycle and powersports wiring harnesses (Harley-Davidson, KTM, Ducati, BMW Motorrad)
• Agricultural equipment control harnesses (John Deere, Case IH, AGCO)
• Construction and off-highway vehicle wiring
• Marine instrument panel connections (protected, dry locations)
• Aftermarket ECU and engine management harnesses

Unsealed vs Sealed DT – When to Use DT06-4S-C017

The unsealed DT06-4S-C017 is designed for protected, dry locations – inside fairings, under seats, or within enclosed control boxes. For exposed underbody, engine bay, or outdoor locations subject to water spray or submersion, use the sealed variant DT06-4S with individual wire seals (114017) and a wedgelock (W4S).

Frequently Asked Questions

Q: What is the mating male connector for DT06-4S-C017?
A: The mating male plug is DT04-4P-C017. The C017 keying ensures these connectors only mate with their matching C017 counterparts – they will not mate with standard DT04-4P or other keying variants.

Q: What terminals are used in DT06-4S-C017?
A: Size 16 contacts – either 0462-201-16141 (socket/female terminal) for the DT06 housing. These accept 16–18 AWG wire (0.5–1.0 mm²). Use the Deutsch HDT-48-00 crimp tool or equivalent.

Q: Can I convert DT06-4S-C017 to a sealed connector?
A: No. The unsealed housing does not have seal cavities. To use a sealed DT connector, you must use the standard DT06-4S housing with individual wire seals (114017) inserted into each cavity before terminal installation.

Q: What is the wedgelock part number for this connector?
A: The wedgelock for all DT06-4S variants is W4S. It locks the terminals in place and must be fully seated (flush with housing face) after all terminals are inserted.

Package Contents

1 × DT06-4S-C017 Female Socket Housing (4-position, unsealed, C017 keying)