Deutsch DT Waterproof Connector Kit Box – 2P/3P/4P/6P/8P for Car & Automotive Wiring

Deutsch DT series waterproof connector kit in a storage box — covering the five most commonly used pin counts (2P, 3P, 4P, 6P, 8P) for automotive and vehicle wiring applications. Each kit includes matched DT04 male and DT06 female housings with size 16 contacts, wedge locks, and wire seals, organized in a compartmentalized storage box for easy access during harness builds and vehicle electrical repairs. The kit format eliminates the need to source each pin count separately and provides organized storage for workshop use.

Kit Contents

• DT04-2P + DT06-2S sets (2-pin)
• DT04-3P + DT06-3S sets (3-pin)
• DT04-4P + DT06-4S sets (4-pin)
• DT04-6P + DT06-6S sets (6-pin)
• DT04-8P + DT06-8S sets (8-pin)
• Each set: male housing + female housing + size 16 contacts + wedge lock + wire seals
• Storage box with compartments

Key Specifications

• Contact Size: Size 16 (13A continuous, 16–22AWG)
• IP Rating: IP67 (mated)
• Operating Temperature: -55°C to +125°C
• Voltage Rating: 600V
• Housing Material: Glass-filled nylon (PA66-GF), UL94 V-0
• Quantity: 5, 10, or 20 sets per pin count (select above)

Frequently Asked Questions

What is included in each set?

Each set includes: 1× DT04 male housing + 1× DT06 female housing + size 16 crimp contacts (male pin contacts for DT04, female socket contacts for DT06, one pair per circuit) + wedge lock (W-series, pin count specific) + individual wire seals (one per circuit). All components required for a complete connector assembly are included — only a Deutsch HDT-48-00 crimp tool and wire are needed.

What is the DT06-4S used for?

DT06-4S is the 4-pin female receptacle housing — the most versatile pin count in the DT series. Common applications: dual-output sensors (supply + two signal outputs + ground), H-bridge motor control (forward/reverse + power + ground), 4-wire heated O2 sensors (heater + and -, signal + and -), and stepper motor connections (two coil pairs). The 4-pin configuration covers a wide range of automotive sensor and actuator circuit requirements.

Can I use this kit for trailer wiring?

Yes. The 6-pin and 8-pin sets are well-suited for trailer wiring harnesses. DT connectors are preferred over standard 7-pin trailer connectors for off-road trailers, boat trailers, and agricultural implements where the connector is exposed to water, mud, and vibration. The IP67 rating and -55°C to +125°C temperature range ensure reliable operation in all trailer towing environments.

What crimp tool do I need?

Deutsch HDT-48-00 hand crimp tool (or equivalent ratchet crimp tool with size 16 dies). All five pin counts in this kit use the same size 16 contacts and the same crimp tool — one tool handles the entire kit. The ratchet mechanism ensures consistent crimp force on every contact — do not use non-ratchet pliers as they produce inconsistent crimps that fail under vibration.

Typical Applications

• Automotive: Engine bay sensors, lighting circuits, underbody connectors
• 4WD & off-road: Auxiliary lighting, winch control, air compressor wiring
• Agricultural: Implement harness connections, sensor wiring
• Marine: Bilge pump, navigation light, and accessory wiring
• Workshop stock: General-purpose sealed connector supply for automotive electrical repair

Package Contents

5, 10, or 20 sets per pin count (select above) — DT connector kit in storage box: 2P + 3P + 4P + 6P + 8P sets, each with male housing, female housing, size 16 contacts, wedge lock, and wire seals.