SPECIFICATIONS

Set standard: 1 thread drill, 1 fork drill, 5 tire repair rubber strips, and 1 glue. Thread drill: clockwise rotation thread design, easy to penetrate the tire, clear debris inside the tire. Fork drill: Made of high-strength steel with exquisite craftsmanship, it does not rust and has good toughness. The rubber handle is comfortable and durable. Tire repair rubber strip: vulcanized with butyl rubber and natural rubber, it is not easy to age and harden, and has good air tightness. Glue: If there is a slight air leakage after repairing the tire, tire repair glue can be used to fill and bond it. Instructions for use: 1. Mark the area where the tire needs to be repaired with a circle number and remove any punctures. 2. Use a tire repair probe to determine the direction of the hole and insert it clockwise to clean the dust inside the hole. 3. Cut one end of the adhesive strip into an oblique opening and pass it into the front hole of the pin insertion tool, so that the length of the adhesive strip at both ends of the hole is basically the same. 4. Insert the pin with the rubber strip into the tire along the hole, ensuring that the rubber strip is inserted 2/3 of the length, and rotate the pin 360 degrees before pulling it out. 5. Cut off the tire repair strip on the outside of the tire.