Automotive Connector Terminal – 1928498806 / DJ626A-2.8, 2.8mm Female Crimp Contact

OEM-specification automotive crimp terminals for 2.8mm pitch connector systems used in Volkswagen Group (VW, Audi, Skoda, SEAT), Bosch, and other European OEM wiring harnesses. Part number 1928498806 is the Bosch/TE Connectivity catalog number; DJ626A-2.8 is the equivalent Chinese standard designation. These female crimp contacts are used in the 2.8mm series connector housings found throughout European vehicle electrical systems — including ignition systems, fuel injection, lighting, and body control modules.

Key Specifications

• Part Numbers: 1928498806 (Bosch/TE), DJ626A-2.8 (Chinese standard equivalent)
• Contact Type: Female crimp terminal (socket contact)
• Pitch: 2.8mm
• Wire Range: 0.5–1.0mm² (20–18AWG)
• Current Rating: 8–10A per contact
• Contact Material: Copper alloy, tin-plated
• Mating Housing: 2.8mm series connector housings (VW/Bosch standard)

2.8mm Terminal Applications in European Vehicles

• Ignition systems: Ignition coil connectors, distributor connections
• Fuel injection: Fuel injector connectors, fuel pump relay connections
• Lighting: Headlight, indicator, and interior lighting connector repairs
• Body control: Door module, window regulator, and central locking connections
• Sensors: Temperature, pressure, and position sensor connector repairs

Frequently Asked Questions

How do I identify if my vehicle uses 1928498806 terminals?

The 1928498806 terminal is used in 2.8mm pitch connector housings throughout VW Group vehicles (Golf, Passat, Audi A4/A6, etc.) and in Bosch-supplied components used across many European brands. Identify by: (1) measuring the connector housing pitch (2.8mm between contact centers); (2) checking the connector housing for Bosch or VW part numbers; (3) cross-referencing the vehicle wiring diagram for the specific connector location. The terminal is a female socket contact — it accepts a male pin in the mating connector.

What crimp tool is required for 1928498806 terminals?

Bosch specifies the 1 987 010 502 crimp tool (or equivalent) for 1928498806 terminals. The correct die must match the terminal’s wire barrel geometry. Using the wrong crimp tool produces an incomplete crimp that fails pull-out testing and causes intermittent connections. For professional automotive electrical repair, use a ratchet crimp tool with the correct die — do not use non-ratchet pliers.

Can I use these terminals to repair a damaged connector?

Yes. The most common repair procedure: (1) use a terminal extraction tool to remove the damaged terminal from the housing; (2) cut the wire behind the damaged terminal; (3) strip the wire 6–8mm; (4) crimp the new terminal onto the wire; (5) insert the new terminal into the housing until it clicks into the retention position. This repair restores the original connector without replacing the entire wiring harness.

Typical Applications

• VW Group vehicles: Terminal replacement in VW, Audi, Skoda, and SEAT wiring harnesses
• Bosch components: Terminal replacement in Bosch ignition, injection, and sensor connectors
• European OEM repair: Wiring harness repair on European vehicles using 2.8mm connector systems
• Automotive workshops: Workshop stock for common European vehicle terminal repairs

Package Contents

Automotive crimp terminals (1928498806 / DJ626A-2.8, quantity as selected). Connector housing not included.