Automotive Female Crimp Terminal – TP031-00200 / TP035-00200 | 50pcs Male & Female

The TP031-00200 / TP035-00200 are precision automotive crimp terminals (sheath contacts) used in wire harness repair and connector assembly. Sold in 50-piece packs for Male and Female variants, these terminals are compatible with standard automotive connector housings requiring 0.2mm² wire gauge contacts.

Key Specifications

Why Crimp Terminals Fail

Automotive crimp terminals corrode from moisture ingress, vibration-induced fretting, and thermal cycling. Corroded or pushed-back terminals cause intermittent circuit faults, high resistance connections, and voltage drop issues that trigger sensor fault codes without obvious wiring damage. Replacing terminals restores clean contact resistance and eliminates ghost faults.

Variant Guide

• 50pcs Female – 50x female crimp contacts (TP031-00200) for socket-side connector repair
• 50pcs Male – 50x male crimp contacts (TP035-00200) for plug-side connector repair

Installation Notes

• Strip wire insulation to 3–4mm before crimping
• Use a ratchet crimp tool rated for 0.2mm² contacts for consistent crimp quality
• Insert terminal into connector housing until the locking tab clicks
• Pull-test each terminal after insertion to verify retention

Frequently Asked Questions

Q: What connector housings are compatible with TP031-00200 / TP035-00200?
A: These terminals are designed for automotive connector housings using 0.2mm² pitch contacts. Cross-reference your connector housing part number to confirm terminal compatibility.

Q: What wire gauge do these terminals accept?
A: TP031-00200 / TP035-00200 are rated for 0.2mm² (approximately 24 AWG) wire.

Q: Can I use these for sensor circuits?
A: Yes. These terminals are suitable for low-current sensor signal circuits, including O2 sensors, temperature sensors, and position sensors.

Q: Do I need a special crimp tool?
A: A ratchet crimp tool rated for 0.2mm² automotive contacts is recommended for consistent, reliable crimps. Plier-type tools may result in inconsistent crimp quality.

Common Applications

• Wire harness repair and re-pinning
• Sensor circuit terminal replacement
• Custom automotive wiring builds
• ECU and body control module harness repair
• Low-current signal circuit connections (0.2mm² / 24 AWG)