8-Pin 1.2mm Unsealed Steering Wheel Clock Spring Connector for Nissan Sylphy & Tiida – Yazaki 7282-5980-40 / MG653254-41
Direct OEM-specification replacement for the Yazaki 8-way 1.2mm pitch unsealed connector used in Nissan Sylphy (Xuanyi) and Tiida steering wheel clock spring (spiral cable) and main harness plug applications, cross-referencing part numbers 7282-5980-40 (male) and MG653254-41 (female).
| Attribute | Specification |
|---|---|
| OEM Part Numbers | 7282-5980-40 (male) / MG653254-41 (female) |
| Vehicle Compatibility | Nissan Sylphy (Xuanyi), Nissan Tiida |
| Pin Count | 8-Way |
| Pitch | 1.2mm |
| Application | Steering wheel clock spring (spiral cable), main harness plug |
| Seal Type | Unsealed (non-waterproof) |
| Housing Material | PA66 Nylon – heat and chemical resistant |
| Terminal Plating | Tin-plated copper, high-precision |
| Wire Gauge Range | 0.3mm² – 0.5mm² (22–20 AWG) |
| Operating Voltage | 12V DC (signal circuits) |
The 7282-5980-40 / MG653254-41 connector pair is used in Nissan Sylphy (B17/Xuanyi) and Nissan Tiida (C11) for steering wheel clock spring (spiral cable) and airbag/horn/cruise control harness connections. A common repair item for Nissan SRS airbag warning light faults caused by clock spring connector failure.
1 Set: 1 × 8-Way Male (7282-5980-40) + 1 × 8-Way Female (MG653254-41) with wire leads and terminal inserts pre-installed.
Q: Which Nissan Sylphy and Tiida generations use the 7282-5980-40?
A: The 7282-5980-40 is used in Nissan Sylphy B17 (2012–2019) and Tiida C11 (2004–2012) for clock spring harness connections. Cross-reference your vehicle’s Nissan parts catalogue to confirm fitment.
Q: Can a faulty clock spring connector cause an airbag warning light?
A: Yes. A damaged or corroded clock spring connector can interrupt the SRS airbag circuit, triggering the airbag warning light. Always inspect the clock spring connector before replacing the clock spring unit itself.
Be the first to know about new collections and special offers.
8 Pin Connectors
