6-Pin Automotive Connector – VW/Audi 893 971 636, Electronic Wiring Harness Plug for VW Golf, Passat & Audi A4

VW/Audi part number 893 971 636 is a 6-pin automotive connector plug used in electronic wiring harness applications across Volkswagen Group vehicles. The 893-series part numbers are associated with VW Group electrical components from the late 1990s and 2000s vehicle generations — VW Golf Mk3/Mk4, Passat B4/B5, Audi A4 B5/B6, and related platforms. This connector is used for sensor, switch, and body electronics connections throughout these vehicles. Available in 5-set packs for workshop stock. Note: 893 971 636 may also be written as 893971636 without spaces.

Key Specifications

• VW/Audi Part Number: 893 971 636
• Pin Count: 6 pins
• Housing Material: PA66 nylon, flame retardant
• Application: Sensor, switch, and body electronics connections in VW Group vehicles
• Compatible Vehicles: VW Golf Mk3/Mk4, Passat B4/B5, Audi A4 B5/B6, Audi A6 C4/C5, Skoda Octavia Mk1
• Quantity: 5 sets

Common Applications for 893 971 636 in VW/Audi Vehicles

• Lambda/O2 sensor connectors: 6-pin connectors for heated oxygen sensors (4-wire lambda sensors use 4 pins; some applications use 6-pin housings)
• Ignition coil connectors: 6-pin connectors for coil-on-plug ignition systems
• Body electronics: Door module, window regulator, and interior lighting connections
• HVAC: Climate control actuator and sensor connections
• Instrument cluster: Sub-harness connections for gauge and warning light circuits

Frequently Asked Questions

What terminals are used in 893 971 636?

The 893 971 636 connector uses 2.8mm VW/Bosch female crimp terminals — part number 1928498806 (DJ626A-2.8). These are the standard 2.8mm terminals used throughout VW Group vehicles for sensor and signal circuits. Crimp tool: Bosch 1 987 010 502 or equivalent ratchet crimp tool with 2.8mm dies.

How do I repair a damaged 893 971 636 connector?

If the housing is cracked or the latch is broken: replace the housing. Cut the wires behind the damaged connector, strip 8–10mm, crimp new 2.8mm VW terminals (1928498806) onto each wire, and insert into the new housing until each terminal clicks. If only the terminals are corroded: extract the corroded terminals, clean the wire ends, crimp new terminals, and reinsert. Apply dielectric grease before reassembly.

Why buy 5 sets?

5-set packs are for automotive workshops that regularly repair VW/Audi vehicles. The 893 971 636 connector is used across multiple VW Group models and applications — keeping it in stock eliminates reorder delays during repair jobs. Workshops specializing in VW/Audi repair benefit from stocking this connector in bulk.

Typical Applications

• VW Golf Mk3/Mk4: Sensor and body electronics connector repair
• VW Passat B4/B5: Wiring harness connector replacement
• Audi A4 B5/B6 / A6 C4/C5: Electronic connector repair
• Skoda Octavia Mk1: Body electronics connector replacement

Package Contents

5 sets — VW/Audi 893 971 636 6-pin automotive connector plugs. Terminals (1928498806) ordered separately if not included.