6-Pin 1.5mm Waterproof Motorcycle Connector – Male & Female | OEM 33482-3602 / 33472-0602
Direct OEM-specification replacement for the Yamaha 6-way 1.5mm pitch waterproof connector series, cross-referencing part numbers 33482-3602 (male) and 33472-0602 (female). Engineered for exposed motorcycle wiring harness locations requiring IP-rated moisture protection.
| Attribute | Specification |
|---|---|
| OEM Part Numbers | 33482-3602 (male) / 33472-0602 (female) |
| Pin Count | 6-Way |
| Pitch | 1.5mm |
| Seal Type | Waterproof – individual wire seals + sealed housing |
| Housing Material | PA66 Nylon – UV and chemical resistant |
| Terminal Plating | Tin-plated copper |
| Operating Voltage | 12V DC |
| Primary Fitment | Yamaha motorcycle wiring harness |
The 33482-3602 and 33472-0602 part numbers are Yamaha OEM references used across multiple model lines for tail light, instrument cluster, and auxiliary circuit harness connections. The waterproof sealed design ensures reliable performance in rain, wash-down, and high-humidity riding conditions.
1 Set: 1 × 6-Way Male Connector (33482-3602) + 1 × 6-Way Female Connector (33472-0602), with wire leads, terminal inserts, and wire seals pre-installed.
Q: Which Yamaha models use the 33482-3602 / 33472-0602 connector?
A: This connector is used across multiple Yamaha motorcycle and scooter models for tail light, instrument, and auxiliary harness circuits. Cross-reference your model’s parts catalogue or wiring diagram to confirm fitment for your specific year and variant.
Q: Is this connector interchangeable with Honda 1.5mm series connectors?
A: The 1.5mm pitch terminal is physically compatible across Yamaha, Honda, Kawasaki, and Suzuki harnesses. However, verify pin count, wire gauge, and terminal part number before substituting across brands.
Q: What is the waterproof rating of this connector?
A: The sealed housing with individual wire seals provides waterproof protection equivalent to IP67 (1 metre immersion, 30 minutes) when correctly assembled with properly crimped terminals and wire seals seated flush.
Q: What crimping tool is required for 1.5mm terminals?
A: Use a ratchet crimping tool with a 1.5mm terminal die (e.g., Molex 63811-0200 or equivalent). Avoid open-barrel pliers crimping, which compromises terminal retention and seal integrity.
Be the first to know about new collections and special offers.
6 Pin Connectors
