6-Pin 0.6mm Waterproof Reversing Radar Connector for Toyota RAV4 & Corolla – Sumitomo 6188-0706 / 6189-1142
Direct OEM-specification replacement for the Sumitomo 6-way 0.6mm pitch waterproof connector pair used in Toyota RAV4 and Corolla reversing radar (PDC) probe cable harness applications, cross-referencing part numbers 6188-0706 (male) and 6189-1142 (female).
| Attribute | Specification |
|---|---|
| OEM Part Numbers | 6188-0706 (male) / 6189-1142 (female) |
| Manufacturer | Sumitomo |
| Vehicle Compatibility | Toyota RAV4, Toyota Corolla |
| Pin Count | 6-Way |
| Pitch | 0.6mm |
| Application | Reversing radar (PDC) probe, parking sensor harness |
| Seal Type | Waterproof – sealed housing with wire seals |
| Housing Material | PA66 Nylon – UV and chemical resistant |
| Terminal Plating | Tin-plated copper, high-precision |
| Wire Gauge Range | 0.13mm² – 0.3mm² (26–22 AWG) |
| Operating Voltage | 12V DC (signal circuits) |
The Sumitomo 6188-0706 / 6189-1142 connector pair is used in Toyota RAV4 (XA30/XA40) and Toyota Corolla (E140/E150/E160) for reversing radar probe cable and parking distance control (PDC) sensor harness connections. A common repair item for Toyota PDC system faults caused by connector corrosion or terminal failure in the exposed rear bumper environment.
1 Set: 1 × 6-Way Male (6188-0706) + 1 × 6-Way Female (6189-1142) with wire leads, terminal inserts, and wire seals pre-installed.
Q: Which Toyota RAV4 and Corolla generations use the 6188-0706 / 6189-1142?
A: These connectors are used in Toyota RAV4 XA30/XA40 (2006–2018) and Corolla E140/E150/E160 (2006–2019) for PDC harness connections. Cross-reference your vehicle’s Toyota parts catalogue to confirm fitment.
Q: What crimping tool is required for 0.6mm Sumitomo terminals?
A: A precision micro-crimping tool with a 0.6mm terminal die is required. Standard 1.0mm+ automotive crimping tools are not compatible with 0.6mm terminals.
Q: Is this connector compatible with aftermarket parking sensors for Toyota?
A: Yes, provided the aftermarket sensor uses the same 6-pin 0.6mm Sumitomo connector interface. Verify pin count and wire gauge against your sensor’s datasheet before installation.
Be the first to know about new collections and special offers.
6 Pin Connectors
