6-Pin 0.6mm Waterproof OBD Diagnostic Connector – MWTPB-06-1A-R / MWTRB-06-1A-R

Direct OEM-specification replacement for the 6-way 0.6mm pitch waterproof low-current connector pair, cross-referencing part numbers MWTPB-06-1A-R (male plug) and MWTRB-06-1A-R (female receptacle). Designed for OBD diagnostic, small-current signal, and low-power automotive circuit harness applications.

Key Specifications

OBD Diagnostic & Low-Power Circuit Applications

The MWTPB-06-1A-R / MWTRB-06-1A-R connector pair is designed for OBD-II diagnostic harness, CAN bus, and low-power signal circuit connections where a sealed 0.6mm pitch interface is required. The 1A per pin current rating makes this connector suitable for diagnostic data lines, sensor signal circuits, and low-power auxiliary connections.

Applications

• OBD-II diagnostic harness and scan tool connections
• CAN bus and LIN bus signal circuit harness
• Low-power sensor and actuator signal connections
• Custom 6-circuit low-current waterproof harness builds
• Telematics and fleet management device wiring

Package Contents

1 Set: 1 × 6-Way Male (MWTPB-06-1A-R) + 1 × 6-Way Female (MWTRB-06-1A-R) with wire leads, terminal inserts, and wire seals pre-installed.

Frequently Asked Questions

Q: What is the maximum current rating for the MWTPB-06-1A-R terminal?
A: The terminal is rated for 1A maximum per pin. This connector is designed for low-current signal and diagnostic circuits only — do not use for power circuits exceeding 1A per pin.

Q: Is this connector compatible with OBD-II diagnostic tools?
A: Yes. The MWTPB-06-1A-R / MWTRB-06-1A-R is used for OBD diagnostic harness connections. Verify pin count and wire gauge against your diagnostic tool’s harness specification before installation.

Q: What crimping tool is required for 0.6mm terminals?
A: A precision micro-crimping tool with a 0.6mm terminal die is required. Standard 1.0mm+ automotive crimping tools are not compatible with 0.6mm terminals.