6-Pin 0.6mm Waterproof Accelerator Pedal Sensor Connector for Toyota & Subaru – Sumitomo 6189-1083 / OEM 90980-12303
Direct OEM-specification replacement for the Sumitomo 6-way 0.6mm pitch waterproof connector used in Toyota and Subaru accelerator pedal position sensor (APPS) wiring harness applications, cross-referencing part numbers 6189-1083 (Sumitomo) and 90980-12303 (Toyota OEM).
| Attribute | Specification |
|---|---|
| OEM Part Numbers | 6189-1083 (Sumitomo) / 90980-12303 (Toyota) |
| Vehicle Compatibility | Toyota, Subaru |
| Pin Count | 6-Way |
| Pitch | 0.6mm |
| Application | Accelerator pedal position sensor (APPS), drive-by-wire harness |
| Seal Type | Waterproof – sealed housing with wire seals |
| Housing Material | PA66 Nylon – heat and chemical resistant |
| Terminal Plating | Tin-plated copper, high-precision |
| Wire Gauge Range | 0.13mm² – 0.3mm² (26–22 AWG) |
| Operating Voltage | 12V DC (signal circuits) |
The Toyota 90980-12303 is the OEM procurement number for the Sumitomo 6189-1083 connector housing. Both refer to the identical 6-pin 0.6mm waterproof connector used in Toyota Corolla, Camry, RAV4, and Subaru Impreza, Forester for accelerator pedal position sensor and drive-by-wire harness connections.
1 Set: 1 × 6-Way Male + 1 × 6-Way Female Waterproof Connector (6189-1083 / 90980-12303, 0.6mm pitch) with wire leads, terminal inserts, and wire seals pre-installed.
Q: Is Toyota 90980-12303 the same as Sumitomo 6189-1083?
A: Yes. The 90980-12303 is Toyota’s OEM part number for the Sumitomo 6189-1083 housing. Both refer to the identical connector.
Q: What causes accelerator pedal sensor connector failure on Toyota?
A: Common failure modes include terminal corrosion from footwell moisture, wire chafing at the connector entry, and terminal push-back from pedal vibration. A faulty APPS connector can cause hesitation, limp mode, and engine management warning lights.
Be the first to know about new collections and special offers.
6 Pin Connectors
