1.0mm Automotive Crimp Pins – OEM 8100-3077 / 8100-3067 | 50pcs Male & Female

The OEM 8100-3077 / 8100-3067 are 1.0mm pitch automotive crimp pins (sheath contacts) used in wire harness repair and connector assembly. Sold in 50-piece packs for Male and Female variants, these terminals are compatible with 1.0mm pitch automotive connector housings used across multiple brands including Honda, Toyota, and Molex-standard connectors.

Key Specifications

Why Crimp Terminals Fail

1.0mm pitch crimp terminals are used in high-density connector systems where fine-pitch contacts are required for ECU, sensor, and body control module harnesses. Corrosion from moisture ingress or vibration-induced fretting causes intermittent circuit faults and high resistance connections. Replacing terminals restores clean contact resistance.

Variant Guide

• 50pcs Female – 50x OEM 8100-3077 female crimp pins (socket side)
• 50pcs Male – 50x OEM 8100-3067 male crimp pins (plug side)

Installation Notes

• Strip wire insulation to 1.5–2mm before crimping (1.0mm pitch contacts require precision stripping)
• Use a ratchet crimp tool rated for 1.0mm pitch contacts – standard tools will damage fine-pitch terminals
• Insert terminal into connector housing until the locking tab clicks
• Pull-test each terminal after insertion to verify retention

Frequently Asked Questions

Q: What connector housings are compatible with OEM 8100-3077 / 8100-3067?
A: These 1.0mm pitch terminals are compatible with Honda, Toyota, and Molex-standard 1.0mm pitch connector housings. Cross-reference your connector housing part number to confirm terminal compatibility.

Q: What wire gauge do 1.0mm pitch terminals accept?
A: 1.0mm pitch terminals typically accept 26–28 AWG (0.08–0.2mm²) wire. Use precision wire strippers for fine-gauge wire.

Q: Do I need a special crimp tool?
A: Yes. 1.0mm pitch terminals require a precision ratchet crimp tool rated for fine-pitch contacts. Standard automotive crimp tools will crush or deform 1.0mm pitch terminals.

Common Applications

• Honda and Toyota 1.0mm pitch connector harness repair
• ECU and sensor harness terminal replacement (fine-pitch)
• Body control module high-density connector re-pinning
• Molex-standard 1.0mm pitch connector applications