4-Pin 0.6mm TPMS Module Connector – Tire Pressure Monitoring & License Plate Light

Direct OEM-specification 4-way 0.6mm pitch male and female connector for tire pressure monitoring system (TPMS) module, trunk wiring, and license plate light harness applications. The ultra-compact 0.6mm pitch design is the OEM standard for high-density signal circuits in modern vehicle body electronics.

Key Specifications

TPMS & Body Electronics: Why 0.6mm Pitch?

Modern TPMS modules, trunk lid controllers, and license plate light assemblies use ultra-compact 0.6mm pitch connectors to maximise pin density in space-constrained body panel locations. The 0.6mm series carries low-current signal and power circuits (typically <1A) for sensor data, LED lighting, and communication bus connections.

Applications

• Tire pressure monitoring system (TPMS) module wiring
• Trunk lid and boot wiring harness connections
• License plate light and LED lamp harness repair
• Body control module (BCM) signal circuit connections
• Rear bumper sensor and parking assist wiring

Package Contents

1 Set: 1 × 4-Way Male + 1 × 4-Way Female Connector (0.6mm pitch) with wire leads and terminal inserts pre-installed.

Frequently Asked Questions

Q: Is this connector compatible with aftermarket TPMS sensors?
A: Yes, provided the pin count and wire gauge match your aftermarket TPMS module’s harness specification. Verify the connector interface against your sensor’s datasheet before installation.

Q: What crimping tool is required for 0.6mm terminals?
A: A precision micro-crimping tool with a 0.6mm terminal die is required. Standard automotive crimping tools (1.0mm+) are not compatible with 0.6mm terminals.

Q: Can I use this connector for a license plate LED upgrade?
A: Yes. The 4-pin 0.6mm connector is used in many OEM license plate light assemblies. Verify pin count and polarity against your vehicle’s wiring diagram before installation.