2-Pin Waterproof Front Bumper Radar Probe Connector – Brown & Grey Female OEM

This 2-pin waterproof female connector is used in front bumper radar probe and parking distance control (PDC) sensor harnesses. Available in Brown and Grey housing colors to match different OEM bumper harness configurations, bare or with 15cm pre-wired leads. The radar probe connector delivers power and signal to individual PDC sensors in the front bumper.

Key Specifications

Why PDC Sensor Connectors Fail

Front bumper PDC sensor connectors are exposed to road debris, water spray, and physical impact. Terminal corrosion or housing damage causes individual parking sensor failures, PDC warning tones, or complete parking sensor system deactivation. Symptoms include PDC fault codes, missing sensor beeps, and parking sensor warning lights. Replacing the connector restores individual sensor signal continuity.

Variant Guide

• Brown Female / Brown Female 15CM – Brown housing for specific bumper harness position
• Grey Female / Grey Female 15CM – Grey housing for alternate bumper harness position

Select the color matching your OEM bumper PDC sensor connector.

Installation Steps

1. Disconnect the vehicle battery
2. Access the front bumper PDC sensor connector (may require partial bumper removal)
3. Release the locking tab and unplug the original 2-pin connector
4. Transfer terminals to the new housing or splice in the pre-wired variant
5. Reconnect and verify PDC sensor function with a scan tool

Frequently Asked Questions

Q: What fault codes indicate a failed PDC sensor connector?
A: Common codes include PDC sensor circuit faults (individual sensor open/short), parking sensor communication errors, and U-codes for PDC module communication faults.

Q: How do I know if I need Brown or Grey?
A: Match the color of your existing OEM PDC sensor connector housing. Brown and Grey variants have the same pin layout but different housing colors for circuit identification in multi-sensor bumper harnesses.

Q: Are terminals included?
A: Yes, terminals are included with all variants.

Compatible Applications

• Front bumper PDC / parking distance control sensor harness
• Radar probe signal connector (2-pin)
• Universal front bumper parking sensor applications (Brown/Grey housing)