Toyota 2-Pin Waterproof Mirror & Reverse Signal Wire Harness Connector – Female OEM

This 2-pin waterproof female connector is used in Toyota door mirror and reverse signal harnesses. The 2-pin configuration serves the mirror fold motor or reverse signal circuit on Toyota platforms. Available bare or with 15cm pre-wired leads.

Key Specifications

Why Mirror & Reverse Connectors Fail

Door mirror connectors are exposed to road spray, UV radiation, and repeated mechanical stress from mirror folding cycles. Terminal corrosion or housing damage causes mirror fold motor failures, mirror heating faults, or reverse signal circuit errors. Symptoms include mirror not folding, mirror heating not working, and reverse camera trigger signal loss. Replacing the connector restores clean mirror and reverse circuit continuity.

Variant Guide

• Female – Bare 2-pin housing with terminals
• Female 15CM – Pre-wired with 15cm leads for direct splice-in installation

Installation Steps

1. Disconnect the vehicle battery
2. Access the door mirror harness connector (may require door panel removal)
3. Release the locking tab and unplug the original 2-pin connector
4. Transfer terminals to the new housing or splice in the pre-wired variant
5. Reinstall and verify mirror fold and reverse signal function

Frequently Asked Questions

Q: What Toyota models use this 2-pin mirror/reverse connector?
A: This connector is used on Toyota Camry, Corolla, RAV4, Hilux, and Lexus ES/IS/GS door mirror and reverse signal harnesses. Cross-reference your vehicle’s wiring diagram to confirm fitment.

Q: Are terminals included?
A: Yes, terminals are included with all variants.

Compatible Applications

• Toyota Camry / Corolla – Door mirror fold motor harness
• Toyota RAV4 / Hilux – Mirror and reverse signal connector
• Lexus ES / IS / GS – Mirror harness circuit