Ford 2-Pin Waterproof Wheel Speed Sensor Connector – Female OEM

This 2-pin waterproof female connector is designed for Ford wheel speed sensor (WSS) harnesses. The wheel speed sensor connector is a critical ABS and traction control circuit component – a degraded connector causes ABS warning lights, traction control faults, and C-code fault codes. Available bare or with 15cm pre-wired leads for direct splice installation.

Key Specifications

Why Wheel Speed Sensor Connectors Fail

Wheel speed sensor connectors are mounted near the wheel hub, exposed to road spray, mud, salt, and constant vibration. Terminal corrosion or housing damage causes open-circuit ABS sensor faults, triggering ABS warning lights, traction control deactivation, and C-code fault codes (C1145, C1155, C1165, C1175 – individual wheel speed sensor circuits). Replacing the connector restores clean sensor signal continuity and clears ABS faults.

Variant Guide

• Female – Bare 2-pin housing with terminals for custom wiring repair
• Female 15CM – Pre-wired with 15cm leads for direct splice-in installation

Installation Steps

1. Safely lift and support the vehicle; remove the wheel if necessary
2. Locate the wheel speed sensor connector near the hub/knuckle
3. Disconnect the original connector and inspect the sensor pigtail
4. Splice in the new connector or transfer terminals to the new housing
5. Route and secure the harness away from moving parts
6. Clear ABS fault codes and verify sensor signal with a scan tool

Frequently Asked Questions

Q: What Ford models use this wheel speed sensor connector?
A: This 2-pin WSS connector is used on Ford Focus, Fiesta, Mondeo, Escape, Fusion, and F-150 ABS harnesses. Cross-reference your vehicle’s wiring diagram to confirm fitment.

Q: What fault codes indicate a failed wheel speed sensor connector?
A: Common codes include C1145 (RF wheel speed sensor), C1155 (LF), C1165 (RR), C1175 (LR) – individual wheel speed sensor input circuit faults on Ford platforms.

Q: Is this waterproof?
A: Yes. The sealed housing provides IP67-equivalent moisture protection suitable for wheel hub environments.

Q: Does this include the sensor?
A: No. This is the connector housing and terminals only. The wheel speed sensor is sold separately.

Compatible Applications

• Ford Focus (2004–2018) – ABS wheel speed sensor harness
• Ford Fiesta (2008–2019) – WSS connector
• Ford Mondeo / Fusion – ABS sensor circuit connector
• Ford Escape / Kuga – Traction control sensor harness
• Ford F-150 – Wheel speed sensor pigtail connector