2-Pin 85202-1 AMP Waterproof Connector – Motorcycle & Automotive Signal Harness

Direct-fit replacement for TE Connectivity / AMP part number 85202-1, a 2-pin waterproof connector from the AMP sealed series used in motorcycle, scooter, and automotive signal harness applications. Provides IP68 protection for 2-pin sensor and switch circuits in exposed locations.

Key Specifications

• OEM Part Number: 85202-1
• Pin Count: 2
• Waterproof Rating: IP68
• Wire Gauge: 18 AWG (0.5 mm²)
• Wire Length: 5.5 inches (140 mm)
• Housing Material: PA66 glass-filled nylon
• Terminal Material: Copper alloy, tin-plated
• Current Rating: Up to 7.5A per pin
• Voltage Rating: 12V / 24V DC

Applications

• Motorcycle brake light switch signal wiring
• Clutch switch and neutral switch connectors
• Scooter fuel level sensor harness
• Sidestand switch signal circuit
• ATV and quad bike switch signal wiring
• Coolant temperature sensor (2-pin) harness
• Oil pressure warning sensor connector

Frequently Asked Questions

Q: What is the mating connector for 85202-1?
A: The mating connector in the same AMP sealed series is 85201-1 (2-pin male). Verify the male housing part number on your vehicle harness before ordering.

Q: Is this connector suitable for a brake light switch circuit?
A: Yes. Brake light switch circuits typically draw less than 1A (signal to ECU or relay). The 7.5A per pin rating is more than sufficient for brake switch signal applications.

Q: What crimping tool is needed?
A: Use a ratchet crimper rated for 18 AWG (0.5 mm²) AMP sealed terminals – Engineer PA-09 or equivalent precision ratchet crimper.

Q: How do I maintain the IP68 seal?
A: Ensure rubber wire seals are correctly seated around the 18 AWG wire insulation before inserting terminals. Apply dielectric grease to the mating connector faces for additional moisture protection.

Package Contents

1 × 2-Pin Waterproof Connector (85202-1) with 18 AWG wire and terminal insert