2-Pin 1544334-1 / 1544317-1 AMP 8mm Waterproof Connector – Peugeot / Citroen C-Triomphe / CL4

Direct-fit replacement for TE Connectivity / AMP part numbers 1544334-1 (male plug) and 1544317-1 (female socket), a 2-pin waterproof 8mm pitch connector used for high-current harness connections on Peugeot and Citroen vehicles, including the C-Triomphe and CL4 platforms. The 8mm pitch is rated at up to 30A per pin – one of the highest-current standard automotive connector formats.

Key Specifications

• OEM Part Numbers: 1544334-1 (male) / 1544317-1 (female)
• Pin Count: 2
• Terminal Pitch: 8mm
• Waterproof Rating: IP68
• Wire Gauge: 18 AWG (0.5 mm²)
• Wire Length: 5.5 inches (140 mm)
• Housing Material: PA66 glass-filled nylon
• Terminal Material: Copper alloy, tin-plated
• Current Rating: Up to 30A per pin
• Package: 1 set (1× male + 1× female with wire)

Compatible Vehicles & Applications

• Peugeot 301 / C-Triomphe: Cooling fan module and main power harness connectors
• Citroen C4 / CL4: High-current relay output and fan control wiring
• Peugeot 308 / 408: Shared PSA platform high-current harness
• Citroen C5 / C6: Main power distribution connectors
• Cross-reference: Verify OEM part number 1544334-1 or 1544317-1 before ordering

8mm Pitch – High-Current Applications

The 8mm pitch AMP series is designed for circuits requiring up to 30A per pin – significantly higher than the 6.3mm Faston (20A) or 2.8mm Metri-Pack (13A). Typical 8mm applications on Peugeot/Citroen platforms include:

• Cooling fan control module (CFCM) main power feed
• Alternator output harness connector
• Battery positive cable junction
• Main relay output for engine management system

Frequently Asked Questions

Q: What is the difference between 1544334-1 and 1544317-1?
A: 1544334-1 is the male plug housing (harness side); 1544317-1 is the female socket housing (device side). This listing includes both as a complete mated pair.

Q: Why does my Peugeot fan run at full speed continuously?
A: When the ECU loses the PWM control signal to the cooling fan module (due to a failed connector), it defaults to maximum fan speed as a fail-safe. Inspect the 1544334-1 / 1544317-1 connector before replacing the fan module.

Q: What wire gauge should I use for a 30A circuit?
A: Use a minimum of 10 AWG (6.0 mm²) for 30A continuous load. The pre-installed 18 AWG wire is for signal-level use – splice to appropriate gauge for high-current applications.

Package Contents

1 × 2-Pin Male Connector (1544334-1) with wire
1 × 2-Pin Female Connector (1544317-1) with wire and terminal insert