2-Pin 1-967412-2 Waterproof Sealed Female Connector – AMP Automotive Sensor Harness

Direct-fit replacement for TE Connectivity / AMP part number 1-967412-2, a 2-pin waterproof sealed female connector used in automotive sensor harness applications. The 1-967412-2 belongs to the AMP sealed connector series, designed for exposed underbody and engine bay locations where IP68 protection is required for reliable long-term operation.

Key Specifications

• OEM Part Number: 1-967412-2
• Pin Count: 2
• Gender: Female socket (with wire)
• Seal Type: Fully sealed (IP68)
• Wire Gauge: 18 AWG (0.5 mm²)
• Wire Length: 5.5 inches (140 mm)
• Housing Material: PA66 glass-filled nylon
• Terminal Material: Copper alloy, tin-plated
• Current Rating: Up to 10A per pin
• Operating Temperature: -40°C to +125°C

Applications

• Coolant temperature sensor (CTS) harness – 2-pin sensor connector
• Oil pressure sensor wiring – underbody sensor location
• Fuel pressure sensor harness – direct injection rail sensor
• Brake fluid level sensor connector
• Transmission temperature sensor wiring
• General-purpose 2-pin waterproof sensor harness repair

AMP Part Number Suffix – What Does “-2” Mean?

In AMP / TE Connectivity part numbers, the suffix after the dash indicates a variant or revision:

• 1-967412-1: Original variant (may differ in housing color or terminal retention)
• 1-967412-2: Revised variant – typically an updated housing geometry or improved terminal lock. The “-2” suffix is the current production version and is backward-compatible with the “-1” mating connector in most applications.

Frequently Asked Questions

Q: What is the mating male connector for 1-967412-2?
A: The mating male plug in the same AMP sealed series is 1-967411-2 (2-pin male). Verify the male housing part number on your vehicle harness before ordering.

Q: Is 1-967412-2 compatible with 1-967412-1?
A: In most applications, yes. The “-2” revision is backward-compatible with the “-1” mating connector. However, verify fitment by checking the terminal pitch and housing dimensions against your original connector before ordering.

Q: What crimping tool is needed?
A: Use a ratchet crimper rated for 18 AWG (0.5 mm²) AMP sealed terminals – Engineer PA-09 or equivalent precision ratchet crimper.

Q: How do I maintain the IP68 seal after field assembly?
A: Ensure the rubber wire seals are correctly seated around the 18 AWG wire insulation before inserting terminals. Apply dielectric grease to the mating connector faces for additional moisture protection.

Package Contents

1 × 2-Pin Female Socket Connector (1-967412-2) with 18 AWG wire and terminal insert