1.0mm Crimp Pins – OEM 1062-20-0122 / 1060-20-0122 | 20pcs & 50pcs Male & Female | Fine-Pitch

The OEM 1062-20-0122 / 1060-20-0122 are 1.0mm pitch fine-pitch crimp pins used in automotive sensor, ECU, and ADAS connector systems. The cross-references 1062-20-0244 / 1060-20-0244 are alternate pack size variants of the same terminal family. Available in 20-piece and 50-piece packs for Male and Female variants. The 1.0mm pitch accommodates fine-gauge wire (typically 24–26 AWG / 0.13–0.2mm²) for signal circuits in high-density connector applications.

Key Specifications

• OEM Part Numbers: 1062-20-0122 (Female) / 1060-20-0122 (Male)
• Alternate Part Numbers: 1062-20-0244 / 1060-20-0244 (alternate pack variants)
• Terminal pitch: 1.0mm (fine-pitch)
• Wire gauge range: 24–26 AWG (0.13–0.2mm²)
• Pack options: 20pcs / 50pcs (Male & Female)
• Application: Fine-pitch sensor, ECU, ADAS connector harness assembly and repair

Automotive Crimp Pin Pitch Comparison

• 0.6mm: 28–32 AWG — ADAS cameras, radar, ultra-high-density ECU connectors
• 1.0mm (this product): 24–26 AWG — standard sensor signal circuits, ECU connectors, ADAS harness
• 1.5mm: 20–22 AWG — general sensor and actuator circuits
• 2.2–2.3mm: 16–18 AWG — power supply and high-current actuator circuits
• 2.8mm+: 14–12 AWG — main power feeds

Part Number Decoding: 1062-20-0122

• 1062: Female (socket) contact series
• 1060: Male (pin) contact series
• 20: Size designation (1.0mm pitch, 20-series)
• 0122: Pack quantity 22 (approximately 20pcs) and plating variant
• 0244: Pack quantity 44 (approximately 50pcs) and plating variant

Handling Requirements for 1.0mm Terminals

• Crimp tool: Use a precision crimp tool rated for 1.0mm pitch contacts. Standard automotive crimp tools are too large and will deform 1.0mm terminals.
• Wire stripping: Strip insulation to exactly 1.5–2.0mm. Over-stripping risks short circuits at 1.0mm spacing.
• Handling: Use fine-tip tweezers. Avoid bare-hand contact — skin oils contaminate the contact surface.
• Insertion: Use a terminal insertion tool to avoid bending the terminal during housing insertion.

Frequently Asked Questions

Q: What connector housings are compatible with 1062-20-0122 / 1060-20-0122?
A: These 1.0mm pitch terminals are compatible with connector housings that specify 1062-20-0122 (female) or 1060-20-0122 (male) contacts. Cross-reference your connector housing’s terminal acceptance specification to confirm compatibility.

Q: Can I use a standard automotive crimp tool?
A: No. Standard automotive crimp tools are designed for 1.5–2.8mm pitch terminals and will destroy 1.0mm terminals. A dedicated 1.0mm precision crimp tool is required.