VW / Audi 6-Pin EPS Steering & Throttle Body Connector – TE 284716-3 / 284717-3
Direct OEM-specification replacement for the Volkswagen and Audi 6-pin connector used on electric power steering (EPS) modules and electronic throttle body (ETB) actuators. Cross-references TE Connectivity part numbers 284716-3 (female/socket side) and 284717-3 (male/plug side). Available bare or with 15cm pre-wired leads (18AWG).
| Part Number | Type |
|---|---|
| 284716-3 | Female (socket side) — harness side |
| 284717-3 | Male (plug side) — component side |
| Pin | Function (EPS) | Function (Throttle Body) | Failure Symptom |
|---|---|---|---|
| 1–2 | +12V power and ground to EPS motor | +12V power and ground to ETB motor | EPS / throttle not responding |
| 3–4 | Torque sensor signal and reference | TPS signal A and reference | C1001 (EPS) / P0120 (TPS) |
| 5–6 | CAN bus or secondary signal | TPS signal B and ground | P0638 (throttle actuator control) |
| Attribute | Detail |
|---|---|
| Pin Count | 6-Pin |
| Part Numbers | 284716-3 / 284717-3 (TE Connectivity) |
| Housing Material | High-temp nylon (PA66) |
| Wire Option | Bare connector / 15cm pre-wired leads (18AWG) |
| Application | EPS steering module, electronic throttle body |
| Compatible Brands | Volkswagen, Audi, SEAT, Škoda (VAG platform) |
| Code | Description |
|---|---|
| C1001 | EPS — steering torque sensor circuit fault |
| P0120 | Throttle position sensor A — circuit malfunction |
| P0638 | Throttle actuator control — range/performance (Bank 1) |
| P2135 | Throttle position sensor A/B — voltage correlation |
Q: My VW steering is heavy and has a C1001 code — is it the connector?
A: C1001 (EPS torque sensor fault) on VW/Audi platforms is frequently caused by a corroded 6-pin EPS connector rather than a failed torque sensor or EPS module. Inspect the connector before replacing the EPS unit.
Q: Are terminals included?
A: Yes, terminals are included with all variants.
Be the first to know about new collections and special offers.
6 Pin Connectors
