USB-C 3A Glue-In Female Receptacle — 11cm Pigtail Charging Port

When you need to add a USB-C charging port to a custom enclosure, car panel, or electronic device, a glue-in receptacle with pre-soldered pigtail leads is the cleanest solution. No PCB required, no surface-mount soldering — just connect the leads, apply adhesive, and you have a permanent, flush-mounted USB-C charging port.

Technical Specifications

Key Features

• 3A rated: Supports up to 15W charging (5V/3A) — sufficient for standard USB-C device charging including smartphones and earbuds
• Glue-in design: Fits into a standard USB-C panel cutout and is secured with adhesive — no snap clips, no screws, clean flush finish
• Pre-wired pigtail leads: 11 cm leads eliminate the need for direct PCB soldering — connect to your power source with standard wire connectors
• 2-pin power-only: Simplified wiring for pure charging applications — no data lines to manage
• Compact form factor: Minimal protrusion behind the panel — suitable for thin enclosures and tight installations

Frequently Asked Questions

Q: Does this support USB-C Power Delivery (PD) or fast charging?
A: No. This is a 2-pin power-only receptacle rated at 5V/3A (15W standard charging). It does not support USB-PD negotiation, Qualcomm Quick Charge, or data transfer.

Q: What adhesive should I use to mount this receptacle?
A: Epoxy adhesive or cyanoacrylate (super glue) works well for most plastic and metal panels. For automotive applications subject to vibration, a flexible epoxy or silicone adhesive is recommended for long-term retention.

Q: What is the panel cutout size required?
A: The cutout should match the standard USB-C female connector body dimensions. Refer to the product images for exact cutout dimensions before drilling or cutting your panel.

Q: Can I use this for data transfer as well as charging?
A: No. This is a 2-pin (power-only) connector. Data lines (D+, D−, CC1, CC2) are not present. For data-capable installations, a 4-pin or full-pinout USB-C receptacle is required.

Package Contents

• 2×–10× USB-C 3A glue-in female receptacle with 11cm pigtail leads (select quantity above)

Add a clean, permanent USB-C charging port to any panel or enclosure — no PCB, no complexity.