Toyota 5-Pin Paddle Shifter / Window Lifter / Gear Lever Wire Harness Connector – OEM 7287-7165 / 90980-12954
Direct OEM-specification replacement for the Sumitomo 5-pin wire harness connector used on paddle shifter switches, window lifter (power window) switches, and gear lever / selector assemblies across Toyota platforms. Cross-references Sumitomo part number 7287-7165 and Toyota OEM number 90980-12954. Uses the 0.7mm contact series in black nylon housing — a compact fine-pitch connector designed for low-current switch and control signal circuits.
The Sumitomo 0.7mm 5-pin connector is used across multiple Toyota interior switch applications. Paddle shifter connectors are particularly vulnerable to damage during steering wheel removal for airbag service or clock spring replacement. The fine-pitch 0.7mm terminals are easily bent when the connector is removed at an angle. A damaged paddle shifter connector causes loss of manual gear change function in automatic transmission vehicles — the transmission defaults to automatic mode only. Window lifter connector damage causes inoperative power windows, often misdiagnosed as a failed window motor or regulator.
| OEM Number | Type | Application |
|---|---|---|
| 7287-7165 | Female housing (switch side) | Sumitomo primary part number |
| 90980-12954 | Female housing | Toyota OEM equivalent |
| Pin Group | Typical Function | Failure Symptom if Open |
|---|---|---|
| Pins 1–2 | Switch power and ground | Switch completely inoperative |
| Pins 3–4 | Up-shift / down-shift signal to TCM | Paddle shift not responding |
| Pin 5 | Illumination or CAN signal | Switch backlight off or CAN fault |
| Attribute | Detail |
|---|---|
| Pin Count | 5-Pin |
| Contact Series | 0.7mm pitch (Sumitomo fine-pitch series) |
| Housing Material | Nylon, black |
| OEM Part Numbers | 7287-7165 / 90980-12954 |
| Applications | Paddle shifter, window lifter switch, gear lever selector |
| Compatible Brands | Toyota (Sumitomo 0.7mm platform) |
| Terminal Included | Yes |
Q: My Toyota Camry paddle shifters stopped working after a steering wheel removal — is it the connector?
A: Yes. The 5-pin 0.7mm paddle shifter connector is the most common failure point during steering wheel or airbag service. The fine-pitch terminals bend easily when the connector is pulled without fully depressing the locking tab. The TCM logs P0900 (clutch actuator circuit) or transmission-specific codes when the paddle shift signal is absent. Inspect the connector before replacing the paddle switch assembly.
Q: What fault codes does a failed paddle shifter connector cause?
A: Common DTCs include P0900 (actuator circuit open), P0901 (actuator circuit range/performance), or transmission-specific codes in the TCM. On Toyota hybrid platforms, the hybrid system may also log a related fault if the paddle shift signal is used for regenerative braking control.
Q: Can this connector also be used for the window lifter switch?
A: Yes. Toyota standardised the Sumitomo 0.7mm 5-pin housing (7287-7165 / 90980-12954) across multiple interior switch applications including window lifter, paddle shifter, and gear lever selector. Verify the OEM part number on your existing connector before ordering.
Q: Are terminals included?
A: Yes, terminals are included with all variants.
Be the first to know about new collections and special offers.
5 Pin Connectors
