Honda 8-Pin Parking Sensor & PDC Module Connector – OEM 7283-2148-30 / 7282-2148-30
Direct OEM-specification replacement for the Honda 8-pin connector used on parking distance control (PDC) modules and multi-sensor harnesses. Cross-references Sumitomo part numbers 7283-2148-30 (female/socket side), 7282-2148-30 (male/plug side), and 7282-2146-40 (alternate). Available bare or with 15cm pre-wired leads.
| OEM Number | Type |
|---|---|
| 7283-2148-30 | Sumitomo — female (socket side) |
| 7282-2148-30 | Sumitomo — male (plug side) |
| 7282-2146-40 | Sumitomo — alternate variant |
| Pin Group | Function | Failure Symptom if Corroded |
|---|---|---|
| Pins 1–2 | PDC module power (+12V) and ground | PDC system completely inactive |
| Pins 3–6 | Individual sensor signal inputs (4 sensors) | One or more sensors not detected, continuous beeping |
| Pins 7–8 | CAN bus or buzzer output signal | PDC warning not sounding, U-code logged |
| Attribute | Detail |
|---|---|
| Pin Count | 8-Pin |
| OEM Part Numbers | 7283-2148-30 / 7282-2148-30 / 7282-2146-40 |
| Housing Material | Nylon (PA66), waterproof sealed |
| Wire Option | Bare connector / 15cm pre-wired leads |
| Application | PDC module harness, multi-sensor parking system |
| Compatible Brands | Honda |
Q: My Honda PDC beeps continuously when reversing — is it the module connector?
A: Continuous PDC beeping on Honda vehicles can be caused by a corroded 8-pin PDC module connector, which causes the module to lose communication with one or more sensors and interpret the missing signal as a permanent obstacle. Inspect the module connector before replacing individual sensors.
Q: Are terminals included?
A: Yes, terminals are included with all variants.
Be the first to know about new collections and special offers.
8 Pin Connectors
