Honda 3-Pin 1.5mm LED Fog Light / Daytime Running Light Waterproof Connector – OEM 6189-7494
Direct OEM-specification replacement for the Sumitomo 3-pin waterproof wire harness connector used on LED fog lights and daytime running lights (DRL) across Honda platforms. Cross-references Sumitomo / Honda OEM part number 6189-7494. Uses the 1.5mm contact series in black nylon housing with waterproof sealing — designed for front bumper-mounted LED lighting applications where moisture, road spray, and temperature cycling are constant.
| OEM Number | Application |
|---|---|
| 6189-7494 | Honda 3-pin 1.5mm LED fog light / DRL connector |
| Pin | Function | Failure Symptom if Open |
|---|---|---|
| 1 | LED power supply (12V, switched) | Fog light / DRL not illuminating |
| 2 | LED control signal (PWM dimming) | DRL not dimming when headlights activated |
| 3 | Ground / earth | LED inoperative |
| Attribute | Detail |
|---|---|
| Pin Count | 3-Pin |
| Contact Series | 1.5mm pitch (Sumitomo series) |
| Housing Material | Nylon, black |
| Sealing | Waterproof |
| OEM Part Number | 6189-7494 |
| Applications | LED fog light, daytime running light (DRL), front bumper lighting |
| Compatible Models | Honda Civic (FC/FK 10th gen), Accord (CR/CV 9th–10th gen), CR-V (RW 5th gen), HR-V (RU) |
| Terminal Included | Yes |
Q: My Honda Civic DRL is not working after a front bumper removal — could it be the connector?
A: Yes. The 3-pin LED DRL connector is the most common failure point during front bumper removal on Honda Civic and Accord. Inspect the connector before replacing the LED DRL module.
Q: Are terminals included?
A: Yes, terminals are included with all variants.
Be the first to know about new collections and special offers.
3 Pin Connectors
