Honda 3-Pin 1.5mm LED Fog Light / Daytime Running Light Waterproof Connector – OEM 6189-7494
Direct OEM-specification replacement for the Sumitomo 3-pin waterproof wire harness connector used on LED fog lights and daytime running lights (DRL) across Honda platforms. Cross-references Sumitomo / Honda OEM part number 6189-7494. Uses the 1.5mm contact series in black nylon housing with waterproof sealing — designed for front bumper-mounted LED lighting applications where moisture, road spray, and temperature cycling are constant.
The 3-pin LED fog light and DRL connector is located in the front bumper, one of the most exposed positions on the vehicle. Road spray, car wash water, and temperature cycling cause the connector seal to harden and crack, allowing moisture to corrode the 1.5mm terminals. A failed connector causes the LED fog light or DRL to be permanently off or to flicker intermittently. On Honda vehicles with automatic DRL systems, a failed connector can also trigger a lighting system fault on the instrument cluster.
| OEM Number | Application |
|---|---|
| 6189-7494 | Honda 3-pin 1.5mm LED fog light / DRL connector |
| Pin | Function | Failure Symptom if Open |
|---|---|---|
| 1 | LED power supply (12V, switched) | Fog light / DRL not illuminating |
| 2 | LED control signal (PWM dimming) | DRL not dimming when headlights activated |
| 3 | Ground / earth | LED inoperative |
| Attribute | Detail |
|---|---|
| Pin Count | 3-Pin |
| Contact Series | 1.5mm pitch (Sumitomo series) |
| Housing Material | Nylon, black |
| Sealing | Waterproof |
| OEM Part Number | 6189-7494 |
| Applications | LED fog light, daytime running light (DRL), front bumper lighting |
| Compatible Models | Honda Civic / Accord / CR-V / HR-V / Jazz (LED DRL variants) |
| Terminal Included | Yes |
Q: My Honda Civic DRL is not working after a front bumper removal — could it be the connector?
A: Yes. The 3-pin LED DRL connector is the most common failure point during front bumper removal on Honda Civic and Accord. The 1.5mm terminal is easily bent when the connector is pulled without pressing the release tab. Inspect the connector before replacing the LED DRL module.
Q: Are terminals included?
A: Yes, terminals are included with all variants.
Be the first to know about new collections and special offers.
3 Pin Connectors
