Ford Transit V348 6-Pin Tail Light & Turn Signal Circuit Board Connector – OEM
Direct OEM-specification replacement for the Ford Transit V348 6-pin rear tail light socket connector. Used in the rear tail light circuit board harness on Ford Transit MK7 and MK8 platforms. Integrates tail light, brake light, turn signal, and reverse light functions in a single 6-pin connector. Available bare or with 15cm pre-wired leads.
| Pin | Function | Failure Symptom if Corroded |
|---|---|---|
| 1 | Tail / position light power (+12V) | Tail light out |
| 2 | Brake light power (+12V) | Brake light not illuminating, MOT failure |
| 3 | Turn signal power (+12V) | Rear turn signal not functioning |
| 4 | Reverse light power (+12V) | Reverse light out |
| 5 | Fog light power (+12V) | Rear fog light not illuminating |
| 6 | Ground / chassis earth (shared) | Multiple lighting functions out simultaneously |
| Attribute | Detail |
|---|---|
| Pin Count | 6-Pin |
| Platform | Ford Transit V348 (MK7 / MK8) |
| Housing Material | Nylon (PA66) |
| Wire Option | Bare connector / 15cm pre-wired leads |
| Application | Rear tail light circuit board harness |
| Compatible Brands | Ford |
Q: My Transit has multiple rear lights out simultaneously — is it the connector?
A: Multiple simultaneous rear lighting failures on Ford Transit are almost always caused by a corroded ground pin (Pin 6) in the 6-pin tail light connector rather than multiple bulb failures. Inspect the connector before replacing the tail light assembly.
Q: Are terminals included?
A: Yes, terminals are included with all variants.
Be the first to know about new collections and special offers.
6 Pin Connectors
