Ford / Land Rover 6-Pin Rear Camera Wire Harness Connector – OEM 30700-1060 / 307001060
Direct OEM-specification replacement for the 6-pin waterproof wire harness connector used on rear view (reversing) cameras across Ford, Land Rover, and other VW Group / European platforms. Cross-references OEM part numbers 30700-1060 and 307001060. Grey nylon and rubber housing with waterproof sealing — designed for rear bumper-mounted camera applications where moisture, road spray, and temperature cycling are constant. Also cross-compatible with VW, Audi, Opel, Mercedes-Benz, and Smart rear camera harness applications.
The 6-pin rear camera connector is located in the rear bumper, one of the most exposed positions on the vehicle. Road spray, car wash water, and temperature cycling cause the connector seal to harden and crack, allowing moisture to corrode the terminals. A failed rear camera connector causes the reversing camera image to disappear, display static, or show a black screen when reverse gear is selected — disabling a key safety feature. The connector is also frequently damaged during rear bumper removal for bodywork or tow bar installation.
| OEM Number | Application |
|---|---|
| 30700-1060 | 6-pin rear camera connector (primary) |
| 307001060 | Same part, alternate formatting |
| Pin | Function | Failure Symptom if Open |
|---|---|---|
| 1 | Camera power supply (12V) | Camera not activating in reverse |
| 2 | Camera ground | Camera inoperative |
| 3 | Video signal (+) | Black screen or no image |
| 4 | Video signal (−) / shield | Static or distorted image |
| 5 | Reverse trigger signal | Camera not activating in reverse |
| 6 | Data / CAN bus (some variants) | Camera system fault on display |
| Attribute | Detail |
|---|---|
| Pin Count | 6-Pin |
| Housing Material | Nylon and rubber (waterproof) |
| Housing Colour | Grey |
| Sealing | Waterproof |
| OEM Part Numbers | 30700-1060 / 307001060 |
| Applications | Rear view camera, reversing camera harness |
| Compatible Models | Ford, Land Rover, VW, Audi, Opel, Mercedes-Benz, Smart |
| Terminal Included | Yes |
Q: My Ford Focus reversing camera shows a black screen — could it be the connector?
A: Yes. A corroded or open 6-pin rear camera connector is a common cause of reversing camera failure on Ford and Land Rover vehicles. Inspect the connector before replacing the camera module or head unit.
Q: Are terminals included?
A: Yes, terminals are included with all variants.
Be the first to know about new collections and special offers.
6 Pin Connectors
