Ford Focus / Honda 3-Pin Ignition Coil High Voltage Connector – OEM 1W7T-14A464-MA
Direct OEM-specification replacement for the 3-pin wire harness connector used on ignition coil-on-plug (COP) assemblies across Ford Focus and Honda platforms. Cross-references Ford OEM part number 1W7T-14A464-MA. Available in left and right groove variants for correct orientation during installation. A failed ignition coil connector causes a cylinder misfire (P0300–P0308), rough running, and increased fuel consumption.
| OEM Number | Application |
|---|---|
| 1W7T-14A464-MA | Ford Focus / Honda 3-pin ignition coil connector (primary) |
| Pin | Function | Failure Symptom if Open |
|---|---|---|
| 1 | 12V power supply (switched) | Coil inoperative, cylinder misfire |
| 2 | ECM trigger signal (ground-side switching) | No spark, P0300–P0308 |
| 3 | Ground / earth | Coil inoperative |
| Attribute | Detail |
|---|---|
| Pin Count | 3-Pin |
| OEM Part Number | 1W7T-14A464-MA |
| Groove Variants | Left groove / Right groove (specify when ordering) |
| Applications | Coil-on-plug (COP) ignition coil harness |
| Compatible Models | Ford Focus (C170 / C307 / C346); Honda Civic / Accord (select variants) |
| Terminal Included | Yes |
Q: My Ford Focus has a P0302 misfire on cylinder 2 — could it be the ignition coil connector?
A: Yes. Swap the ignition coil from cylinder 2 to another cylinder — if the misfire follows the coil, the coil has failed. If the misfire stays on cylinder 2, inspect the connector (OEM 1W7T-14A464-MA) before replacing the coil.
Q: Are terminals included?
A: Yes, terminals are included with all variants.
Be the first to know about new collections and special offers.
3 Pin Connectors
