Ford Falcon BA/BF 3-Pin MAP Sensor & Diesel Injection Pump Connector – OEM 1928403966
Direct OEM-specification replacement for the Ford Falcon BA and BF 3-pin connector used on MAP (Manifold Absolute Pressure) sensors and diesel injection pump harnesses. Cross-references OEM part number 1928403966. Specifically suited to the Ford Falcon XR6 Turbo and Aux models. Available bare or with 15cm pre-wired leads.
| Pin | Function | Failure Symptom if Corroded |
|---|---|---|
| 1 | +5V reference voltage from ECU | P0107 — MAP circuit low input, no boost reading |
| 2 | MAP signal output to ECU (0–5V) | P0106 — MAP range/performance, limp mode |
| 3 | Signal ground / return | P0108 — MAP circuit high input, overboost fault |
| Attribute | Detail |
|---|---|
| Pin Count | 3-Pin |
| OEM Part Number | 1928403966 |
| Housing Material | High-temp nylon (PA66), waterproof sealed |
| Wire Option | Bare connector / 15cm pre-wired leads |
| Application | MAP sensor harness, diesel injection pump harness |
| Compatible Models | Ford Falcon BA / BF — XR6 Turbo, Aux model |
| Code | Description |
|---|---|
| P0106 | MAP / boost pressure sensor — range/performance |
| P0107 | MAP / boost pressure sensor — circuit low |
| P0108 | MAP / boost pressure sensor — circuit high |
Q: My Falcon XR6 Turbo is in limp mode with P0106 — is it the MAP connector?
A: P0106 (MAP range/performance) on the Falcon XR6 Turbo frequently causes limp mode as the ECU cannot accurately calculate boost pressure. A corroded 3-pin MAP connector is a common cause before the sensor itself fails. Inspect the connector before replacing the MAP sensor.
Q: Are terminals included?
A: Yes, terminals are included with all variants.
Be the first to know about new collections and special offers.
3 Pin Connectors
