Automotive Connector Terminal – TK195-00100 / DJ628Y-0.6A, 0.6mm Female Crimp Contact

TK195-00100 / DJ628Y-0.6A are 0.6mm female crimp terminals for high-density automotive connector systems. The TK195 prefix indicates a specific OEM terminal series; DJ628Y-0.6A is the Chinese standard equivalent. The 0.6mm contact size is used in high-density connector systems where circuit count requirements exceed what can be achieved with 1.2mm or 1.5mm pitch contacts. Used in modern vehicle ECU, body electronics, and sensor applications.

Key Specifications

• Part Designations: TK195-00100, DJ628Y-0.6A
• Contact Type: Female crimp terminal (socket contact)
• Contact Size: 0.6mm pitch
• Wire Range: 0.13–0.35mm² (26–22AWG)
• Current Rating: 3–5A per contact
• Contact Material: Copper alloy, gold-plated
• Application: High-density ECU, sensor, and body electronics connectors

0.6mm Terminal Applications

• ECU main connectors: High-density ECU connectors on modern gasoline and diesel engines
• Body control modules: BCM connectors with high circuit density
• Transmission control: TCM connectors for automatic transmission control circuits
• Sensor clusters: Multi-sensor assemblies with many signal outputs

Frequently Asked Questions

What crimp tool is required for TK195-00100 terminals?

0.6mm terminals require a dedicated micro-crimp tool with dies specifically designed for the 0.6mm contact geometry. Standard automotive crimp tools will crush 0.6mm terminals. Use a dedicated micro-crimp tool for consistent, reliable crimps. Verify the required crimp tool by cross-referencing the terminal part number in the manufacturer’s catalog.

How do I extract 0.6mm terminals from a connector housing?

Use a micro terminal extraction pick sized for 0.6mm contacts. Insert the pick from the mating face, depress the locking lance, and pull the wire from the rear. Work under magnification — 0.6mm contacts are small and the locking lance is difficult to see without magnification. Do not use a standard extraction tool — it will damage the 0.6mm housing cavity.

Are gold-plated contacts required for 0.6mm terminals?

Gold plating is strongly recommended for 0.6mm signal contacts. At 0.6mm contact size, the contact area is very small — even a thin oxide layer significantly increases contact resistance. Gold plating prevents oxidation, maintaining the low contact resistance required for reliable signal transmission in ECU and sensor circuits.

Typical Applications

• ECU repair: High-density ECU connector terminal replacement
• Body electronics: BCM and body control connector terminal repair
• Sensor connections: Multi-sensor cluster connector terminal replacement
• Automotive workshops: Workshop stock for 0.6mm terminal repairs on modern vehicles

Package Contents

Automotive micro crimp terminals, TK195-00100 / DJ628Y-0.6A (quantity as selected). Connector housing not included.