GM Crimp Terminal – OEM 10762775 / 10762803 | 50pcs Male & Female

The OEM 10762775 / 10762803 are General Motors factory crimp terminals (sheath contacts) used in GM wire harness connectors across Chevrolet, Buick, Cadillac, GMC, and Opel platforms. Sold in 50-piece packs for Male and Female variants, these terminals are the correct OEM replacement for GM connector re-pinning and harness repair.

Key Specifications

Why GM Terminals Fail

GM crimp terminals corrode from moisture ingress, vibration-induced fretting, and thermal cycling in underhood environments. Corroded or pushed-back terminals cause intermittent circuit faults, high resistance connections, and voltage drop issues that trigger sensor fault codes, BCM communication errors, or intermittent electrical gremlins. Replacing terminals with OEM-spec contacts restores clean contact resistance.

Variant Guide

• 50pcs Female – 50x OEM 10762775 female crimp contacts for socket-side connector repair
• 50pcs Male – 50x OEM 10762803 male crimp contacts for plug-side connector repair

Installation Notes

• Strip wire insulation to 3–4mm before crimping
• Use a GM-compatible ratchet crimp tool for consistent crimp quality
• Insert terminal into GM connector housing until the locking tab clicks
• Pull-test each terminal after insertion to verify retention
• Apply dielectric grease to terminals in moisture-exposed locations

Frequently Asked Questions

Q: What GM connector housings are compatible with OEM 10762775 / 10762803?
A: These terminals are used across a wide range of GM connector housings on Chevrolet, Buick, Cadillac, GMC, and Opel platforms. Cross-reference your connector housing part number to confirm terminal compatibility.

Q: What is the difference between 10762775 and 10762803?
A: OEM 10762775 is the female (socket) crimp contact; OEM 10762803 is the male (pin) crimp contact. Order the gender matching the connector side you are repairing.

Q: Can I use these for ECU harness repair?
A: Yes. These OEM GM terminals are suitable for ECU, BCM, and body harness re-pinning where the original terminals are corroded or damaged.

Q: Do I need a special crimp tool?
A: A ratchet crimp tool compatible with GM terminal sizes is recommended. GM service tool J-38125 or equivalent is the factory-specified tool for these contacts.

Common Applications

• GM wire harness repair and connector re-pinning
• ECU and BCM harness terminal replacement
• Sensor circuit terminal repair (O2, MAP, MAF, TPS)
• Body electrical and lighting harness repair
• Chevrolet, Buick, Cadillac, GMC, Opel platform wiring