8-Pin Carter Fuel Pump & Sensor Connector – TE 776495-1 / 776494-1
Direct OEM-specification replacement for the 8-pin connector used on Carter fuel pump modules and associated sensor harnesses. Cross-references TE Connectivity part numbers 776495-1 (female/socket side) and 776494-1 (male/plug side). Available bare or with 15cm pre-wired leads.
| Part Number | Type |
|---|---|
| 776495-1 | Female (socket side) — harness side |
| 776494-1 | Male (plug side) — fuel pump module side |
| Pin Group | Function | Failure Symptom if Corroded |
|---|---|---|
| Pins 1–2 | Fuel pump motor power (+12V) and ground | No fuel pressure, engine no-start |
| Pins 3–4 | Fuel level sender signal and reference | Inaccurate fuel gauge, P0460–P0464 |
| Pins 5–6 | Fuel pump speed control (PWM) signal and ground | P0230 / P0627 — fuel pump circuit fault |
| Pins 7–8 | Fuel pressure sensor signal and reference | P0087 — fuel rail pressure too low |
| Attribute | Detail |
|---|---|
| Pin Count | 8-Pin |
| Part Numbers | 776495-1 / 776494-1 (TE Connectivity) |
| Housing Material | Nylon (PA66), fuel-resistant |
| Wire Option | Bare connector / 15cm pre-wired leads |
| Application | Carter fuel pump module harness |
| Code | Description |
|---|---|
| P0230 | Fuel pump primary circuit — malfunction |
| P0627 | Fuel pump control circuit — open |
| P0087 | Fuel rail / system pressure — too low |
| P0460–P0464 | Fuel level sensor circuit faults |
Q: Are terminals included?
A: Yes, terminals are included with all variants.
Be the first to know about new collections and special offers.
8 Pin Connectors
