6-Pin MG644483-4 Waterproof Connector – Car Camera & Door Handle Harness Hyundai / KIA / Land Rover / Volvo

Direct-fit replacement for part number MG644483-4, a 6-pin waterproof connector used for car camera harness and door handle wiring connections on Hyundai, KIA, Land Rover, and Volvo vehicles. The 6-pin format consolidates camera power, video signal, and door handle sensor circuits into a single IP68-sealed connector.

Key Specifications

• Part Number: MG644483-4
• Pin Count: 6
• Waterproof Rating: IP68
• Wire Gauge: 18 AWG (0.5 mm²)
• Wire Length: 5.5 inches (140 mm)
• Housing Material: PA66 glass-filled nylon
• Terminal Material: Copper alloy, tin-plated
• Current Rating: Up to 10A per pin

Camera Connector Pin Assignment (6-Pin)

Compatible Vehicles

• Hyundai: Tucson, Santa Fe, Sonata – rear camera and door handle harness
• KIA: Sportage, Sorento, Optima – camera connector
• Land Rover: Discovery, Range Rover – door handle and camera wiring
• Volvo: XC60, XC90 – camera harness connector

Camera Connector Failure – Symptoms

• Rear camera not displaying – check Pin 1 voltage (should read 12V in reverse)
• Distorted or no video signal – check Pin 3 and Pin 4 continuity
• Door handle not responding – check Pin 5 signal with door handle pulled
• Intermittent camera – wiggle connector while in reverse to confirm loose terminal

FAQ

Q: What video signal format does this connector support?
A: The MG644483-4 connector supports both CVBS (composite analog) and LVDS (low-voltage differential signaling) video formats depending on the vehicle platform. Verify the signal format on your vehicle before ordering a replacement camera.

Q: What crimping tool is needed?
A: Use a ratchet crimper rated for 18 AWG (0.5 mm²) – Engineer PA-09 or equivalent.

Package Contents

1 × 6-Pin Waterproof Connector (MG644483-4) with 18 AWG wire and terminal inserts