6-Pin A/C Control Panel & Blower Resistor Connector – OEM 7123-6060 / 6101-5061 / PH565-06010
Direct OEM-specification replacement for the 6-pin connector used on A/C control panels and blower motor resistor harnesses. Cross-references OEM part numbers 7123-6060, 6101-5061, and PH565-06010. Used across multiple vehicle platforms for HVAC control and blower speed regulation. Available bare or with 15cm pre-wired leads.
| OEM Number | Application |
|---|---|
| 7123-6060 | A/C control panel / blower resistor connector — primary |
| 6101-5061 | Alternate cross-reference |
| PH565-06010 | Alternate cross-reference |
| Pin Group | Function | Failure Symptom if Corroded |
|---|---|---|
| Pins 1–2 | Blower motor power (+12V) and ground | Blower completely inactive, no airflow |
| Pins 3–4 | Blower speed control signal and reference (PWM or resistor taps) | Blower only works on one speed, speed control not responding |
| Pins 5–6 | A/C control panel signal and feedback | A/C not responding to panel switch, climate control fault |
| Attribute | Detail |
|---|---|
| Pin Count | 6-Pin |
| OEM Part Numbers | 7123-6060 / 6101-5061 / PH565-06010 |
| Housing Material | Nylon (PA66) |
| Wire Option | Bare connector / 15cm pre-wired leads |
| Application | A/C control panel harness, blower motor resistor harness |
Q: My blower only works on high speed — is it the connector or the resistor?
A: Blower working only on high speed is the classic symptom of a failed blower motor resistor. However, a corroded 6-pin connector at the resistor can cause the same symptom by increasing contact resistance on the lower-speed control pins. Inspect the connector before replacing the resistor.
Q: Are terminals included?
A: Yes, terminals are included with all variants.
Be the first to know about new collections and special offers.
6 Pin Connectors
