6-Pin 0.6mm Series Unsealed Female Motorcycle Connector – OEM 98192-0001
Direct OEM-specification replacement for the 6-way 0.6mm pitch unsealed female connector, cross-referencing part number 98192-0001. The 0.6mm pitch series represents the most compact terminal standard in motorcycle wiring, used exclusively for ultra-high-density ECU and sensor signal circuits where space is critically limited.
| Attribute | Specification |
|---|---|
| OEM Part Number | 98192-0001 |
| Pin Count | 6-Way |
| Gender | Female (socket) |
| Pitch | 0.6mm |
| Seal Type | Unsealed (non-waterproof) |
| Housing Material | PA66 Nylon – heat and chemical resistant |
| Terminal Plating | Tin-plated copper, high-precision |
| Wire Gauge Range | 0.13mm² – 0.3mm² (26–22 AWG) |
| Operating Voltage | 12V DC (signal circuits) |
The 0.6mm pitch series is the smallest standard connector pitch used in motorcycle wiring harnesses, reserved for ECU signal, sensor data, and CAN bus circuits where wire gauges of 0.13mm² to 0.3mm² are used. This series requires precision crimping tools and handling — standard 1.0mm or 1.2mm tooling is not compatible.
1 × 6-Way Female Connector Housing (98192-0001, 0.6mm pitch) with wire leads and terminal inserts pre-installed.
Q: What crimping tool is required for 0.6mm terminals?
A: A precision micro-crimping tool with a 0.6mm terminal die is required. Standard motorcycle crimping tools (1.0mm–1.5mm) are not compatible with 0.6mm terminals and will damage the terminal.
Q: Is the 0.6mm series compatible with the 1.0mm or 1.2mm series?
A: No. The 0.6mm, 1.0mm, and 1.2mm pitch series use different terminal sizes and housing geometries and are not interchangeable. Always verify pitch before ordering.
Q: What wire gauge does the 0.6mm terminal accept?
A: 0.13mm² to 0.3mm² (26–22 AWG). These are ultra-fine signal wires — handle with care to avoid conductor damage during stripping and crimping.
Be the first to know about new collections and special offers.
6 Pin Connectors
