4-Pin Fog Light & Lighting Harness Connector – OEM 132004-001 / 132004-000 | Universal
Direct OEM-specification replacement for the 4-pin connector used in fog light, DRL, and auxiliary lighting harnesses. Cross-references OEM part numbers 132004-001 and 132004-000. Universal fit across multiple vehicle platforms. Available bare or with 15cm pre-wired leads.
| OEM Number | Type |
|---|---|
| 132004-001 | Fog light / lighting connector — primary |
| 132004-000 | Fog light / lighting connector — alternate |
| Pin | Function | Failure Symptom if Corroded |
|---|---|---|
| 1 | +12V switched power to fog light / DRL | Fog light / DRL not illuminating |
| 2 | Ground / chassis earth | Flickering fog light, intermittent operation |
| 3 | Control signal (BCM / lighting module) | Fog light not responding to switch |
| 4 | Feedback / diagnostic signal | Lighting fault code logged in BCM |
| Attribute | Detail |
|---|---|
| Pin Count | 4-Pin |
| OEM Part Numbers | 132004-001 / 132004-000 |
| Housing Material | Nylon (PA66) |
| Wire Option | Bare connector / 15cm pre-wired leads |
| Application | Fog light harness, DRL harness, auxiliary lighting harness |
Q: My fog light works but the DRL on the same circuit doesn’t — is it the connector?
A: Selective failure of one function (e.g. DRL) while another (fog light) works on the same 4-pin connector indicates corrosion on the control signal pin (Pin 3) rather than the power pin. Inspect the connector before replacing the DRL module or BCM.
Q: Are terminals included?
A: Yes, terminals are included with all variants.
Be the first to know about new collections and special offers.
4 Pin Connectors
