3-Pin XLR Audio Connector – Color Head Pure Copper Male & Female Microphone Plug Socket, 10 Sets

3-Pin XLR Audio Connector – Color Head Pure Copper Male & Female Microphone Plug Socket, 10 Sets

Black-C XLR 3pin / 10 set(Male Female)
$33.71
Sale price  $33.71 Regular price  $57.78
Skip to product information
3-Pin XLR Audio Connector – Color Head Pure Copper Male & Female Microphone Plug Socket, 10 Sets
Cable Parts Online
3-Pin XLR Audio Connector – Color Head Pure Copper Male & Female Microphone Plug Socket, 10 Sets
$33.71
Regular price  $57.78 Sale price  $33.71
Color
Package Quantity10 set(Male Female)
Description

3-Pin XLR Audio Connector – Color Head Pure Copper Male & Female Microphone Plug Socket

XLR 3-pin connectors are the universal standard for balanced audio connections in professional audio, broadcast, and stage lighting (DMX) applications. The balanced (differential) signal transmission of XLR cables rejects common-mode noise — making XLR the preferred connection for microphones, mixing consoles, power amplifiers, and any audio application where cable runs exceed 3–5 meters or pass near electrical interference sources. These connectors feature pure copper contacts for low contact resistance and color-coded heads for quick identification in multi-cable stage and studio environments.

Key Specifications

  • Standard: XLR 3-pin (IEC 61076-2-103 compatible)
  • Contact Material: Pure copper, gold-plated (variant dependent)
  • Housing: Zinc alloy body with color-coded plastic head
  • Current Rating: 15A per contact
  • Voltage Rating: 50V AC/DC (audio signal); 48V DC (phantom power)
  • Termination: Solder cup
  • Cable Diameter: Accepts 4–7mm OD cable (verify per variant)
  • Mating Cycles: 500+ rated
  • Quantity: 10 sets (10× male + 10× female)

XLR Pin Assignment — Standard Wiring

XLR 3-pin follows AES14 / IEC 60268-12 standard pin assignment:

  • Pin 1: Ground / Shield (chassis earth, cable screen)
  • Pin 2: Hot / Positive (+) — non-inverting signal
  • Pin 3: Cold / Negative (-) — inverting signal

Note: Some older equipment (particularly vintage Neve and certain European consoles) uses Pin 3 Hot / Pin 2 Cold (reversed polarity). Connecting reversed-polarity equipment causes phase cancellation — the audio signal appears to work but bass frequencies are severely attenuated. Always verify pin assignment when connecting equipment from different manufacturers.

XLR for DMX Lighting Control

XLR 3-pin connectors are also used for DMX512 stage lighting control signals, though this is technically incorrect per the DMX512 standard (which specifies 5-pin XLR). In practice, 3-pin XLR is widely used for DMX in smaller installations:

  • DMX pin assignment: Pin 1 = Ground, Pin 2 = Data- (DMX-), Pin 3 = Data+ (DMX+)
  • Cable requirement: DMX requires 110Ω impedance cable (not standard microphone cable which is 60Ω). Using microphone cable for DMX causes signal reflections and erratic fixture behavior over runs >30m.
  • Termination: DMX runs require a 120Ω terminator at the last fixture to prevent signal reflections.

What Questions Does This Product Answer?

  • "What is the difference between XLR male and XLR female?" — XLR male has protruding pins (typically on the cable end / output). XLR female has recessed sockets (typically on the equipment panel / input). Signal flows from male to female: microphone (female panel socket) → cable (male plug at mic end, female plug at mixer end) → mixer (female panel socket).
  • "Can I use 3-pin XLR for phantom power?" — Yes. 48V phantom power is delivered on pins 2 and 3 simultaneously (equal voltage on both signal pins relative to pin 1 ground). Condenser microphones draw phantom power through the same XLR cable that carries the audio signal.
  • "Why does my microphone hum when connected via XLR?" — Common causes: (1) ground loop — multiple pieces of equipment connected to different AC outlets creating a ground potential difference; (2) pin 1 not connected to chassis ground at one end; (3) cable shield broken or not connected; (4) using unbalanced cable in a balanced XLR connection.
  • "What is the color coding on these connectors for?" — Color-coded heads allow quick visual identification of cable function in multi-cable environments: e.g., red = channel 1, blue = channel 2, yellow = monitor send. There is no universal color standard — color assignment is user-defined.

Typical Applications

  • Live sound: Microphone cables, DI box connections, stage box (snake) connections, monitor sends
  • Studio recording: Microphone to preamp connections, patchbay wiring, outboard gear connections
  • Broadcast: Camera microphone connections, intercom systems, broadcast console wiring
  • Stage lighting: DMX512 control signal distribution (3-pin XLR used as DMX connector)
  • AV installation: Fixed installation microphone connections, conference room audio, lecture hall PA systems

Package Contents

10 sets — 10× male XLR plug + 10× female XLR socket, color head, pure copper contacts. Solder cup termination.

Free Shipping Over $199
  • Standard Shipping: 7-15 business days worldwide
  • Express Shipping: 3-7 business days (UPS / FedEx)
  • Free Shipping: Orders over $199 qualify automatically
  • Tracking: Full tracking number provided for all orders
30-Day Return Policy
  • Returns: 30-day hassle-free return window
  • Condition: Items must be unused and in original packaging
  • Refund: Full refund processed within 3-5 business days
Why Choose Us?
  • Factory Direct: ISO/TS 16949 certified manufacturer
  • Quality: 100% electrical continuity tested before shipment
  • Experience: 15+ years in automotive connector industry
  • Support: Professional technical support available
Secure Payment Latest encryption technology
Money-Back Guarantee 30-day hassle-free returns
Quality Assured Factory certified products
Global Fast Shipping Worldwide express delivery

You may also like

Subscribe to our emails

Be the first to know about new collections and special offers.

Shop by collection

Contact us