3-Pin Waterproof Female Connector – Motorcycle & Automotive Signal Harness

A versatile 3-pin waterproof female connector for motorcycle, scooter, and automotive signal harness applications. IP68 sealed for reliable operation in exposed locations – suitable for sensor wiring, switch circuits, and low-power connections where moisture protection is required.

Key Specifications

• Pin Count: 3
• Gender: Female socket (with wire)
• Waterproof Rating: IP68
• Wire Gauge: 18 AWG (0.5 mm²)
• Wire Length: 5.5 inches (140 mm)
• Housing Material: PA66 glass-filled nylon
• Terminal Material: Copper alloy, tin-plated
• Current Rating: Up to 7.5A per pin
• Voltage Rating: 12V / 24V DC

Applications

• Motorcycle throttle position sensor (TPS) harness
• Scooter coolant temperature sensor wiring
• ABS wheel speed sensor connectors
• Neutral switch and sidestand switch signal circuits
• ATV and quad bike sensor wiring
• Marine sensor harness connections
• Aftermarket lighting and accessory harness integration

IP68 Seal Maintenance

• Ensure rubber wire seals are correctly seated around the 18 AWG wire insulation before inserting terminals
• Apply dielectric grease to the mating connector faces for additional moisture protection
• Using undersized wire (20 AWG or smaller) will prevent the seal from compressing correctly, compromising the IP68 rating

Frequently Asked Questions

Q: What current rating is this connector suitable for?
A: Up to 7.5A per pin – suitable for sensor signals, switch circuits, and lighting loads up to 90W at 12V. For higher current loads, use the 2.8mm Metri-Pack 280 (13A/pin) or 6.3mm Faston series (20A/pin).

Q: What crimping tool is needed?
A: Use a ratchet crimper rated for 18 AWG (0.5 mm²) – Engineer PA-09 or equivalent precision ratchet crimper.

Package Contents

1 × 3-Pin Female Connector with 18 AWG wire and terminal insert