3-Pin 7287-0955-60 Yazaki Waterproof Connector – Headlight / DRL / Turn Signal Jeep / Chrysler / Dodge

Direct-fit replacement for Yazaki OEM part number 7287-0955-60, a 3-pin waterproof connector used for headlight assembly, daytime running light (DRL), parking light, and turn signal harness connections on Jeep, Chrysler, and Dodge vehicles. Yazaki is the primary OEM connector supplier for Stellantis (formerly FCA) North American harnesses.

Key Specifications

• OEM Part Number: 7287-0955-60 (Yazaki)
• Pin Count: 3
• Waterproof Rating: IP68
• Wire Gauge: 18 AWG (0.5 mm²)
• Wire Length: 5.5 inches (140 mm)
• Housing Material: PA66 glass-filled nylon
• Terminal Material: Copper alloy, tin-plated
• Current Rating: Up to 10A per pin
• Suffix -60: Wire seal color / variant code

Compatible Vehicles & Applications

• Jeep Wrangler (JK/JL): Headlight assembly and DRL harness connector
• Jeep Grand Cherokee (WK/WK2): Front lighting harness junction connector
• Chrysler 300 / 300C: Headlight and turn signal wiring
• Dodge Charger / Challenger: Front lighting harness connector
• Dodge Ram / RAM 1500: Headlight assembly and parking light harness
• Cross-reference: Verify OEM part number 7287-0955-60 before ordering

Lighting Connector Failure – Diagnosis

• Headlight not working: Measure voltage at Pin 1 with headlights on – should read 12V
• DRL inoperative: Check Pin 2 voltage with ignition on – DRL circuits are active with ignition
• Turn signal not flashing: Check Pin 3 for pulsing 12V signal with turn signal activated
• Intermittent lighting: Wiggle connector while light is on – flickering confirms loose terminal

Frequently Asked Questions

Q: What does the -60 suffix mean on Yazaki part numbers?
A: In the Yazaki 7287 series, the last two digits indicate the wire seal color and variant code. -60 denotes a specific seal variant used in Stellantis (Jeep/Chrysler/Dodge) harness applications.

Q: Is 7287-0955-60 compatible with Mopar replacement parts?
A: Yes. Mopar (Stellantis OEM parts) sources connectors from Yazaki for North American vehicles. The 7287-0955-60 is the Yazaki manufacturer number for the same connector sold under Mopar part numbers.

Q: What crimping tool is needed?
A: Use a ratchet crimper for 0.5mm² (18 AWG) Yazaki terminals – Hozan P-706 or Engineer PA-09.

Package Contents

1 × 3-Pin Waterproof Connector (7287-0955-60) with 18 AWG wire and terminal insert