3-Pin 211PC032S0049 Unsealed Female Connector – Motorcycle & Automotive Signal Harness

Direct-fit replacement for part number 211PC032S0049, a 3-pin unsealed female connector used in motorcycle, scooter, and automotive signal harness applications. This connector belongs to the PC (Positive Contact) series, designed for reliable low-current signal connections in protected, dry locations within vehicle electrical systems.

Key Specifications

• Part Number: 211PC032S0049
• Pin Count: 3
• Gender: Female socket (with wire)
• Seal Type: Unsealed (for dry, protected environments)
• Wire Gauge: 22 AWG (0.3 mm²)
• Wire Length: 5.5 inches (140 mm)
• Housing Material: PA66 nylon
• Terminal Material: Copper alloy, tin-plated
• Current Rating: Up to 3A per pin (signal circuits)
• Voltage Rating: 12V / 24V DC

Part Number Decoded – 211PC032S0049

• 211 – Series identifier
• PC – Positive Contact terminal type
• 032 – 3-position (3-pin) housing
• S – Socket (female)
• 0049 – Color/variant code

Applications

• Motorcycle instrument cluster signal wiring
• Scooter ECU input signal connectors
• Throttle position sensor (TPS) harness
• Neutral and sidestand switch signal circuits
• ATV and quad bike sensor wiring
• Automotive interior control module signal connectors

Frequently Asked Questions

Q: What is the mating male connector for 211PC032S0049?
A: The mating male housing in the same PC series is 211PC032P0049 (3-pin male, same color code). The “S” in the part number denotes Socket (female); “P” denotes Plug (male).

Q: Is this connector waterproof?
A: No. The 211PC032S0049 is an unsealed connector designed for dry, protected locations. For exposed locations subject to water spray, use the sealed variant with individual wire seals.

Q: Why does my instrument cluster show intermittent readings?
A: Intermittent readings from instrument cluster sensors are commonly caused by oxidized terminals in unsealed connectors. Clean with electrical contact cleaner and apply dielectric grease to the mating faces. If the problem persists, replace the connector.

Q: What crimping tool is needed?
A: Use a precision ratchet crimper rated for 22 AWG (0.3 mm²) – Engineer PA-09 or equivalent. Standard automotive crimpers are too large for the PC series terminals.

Package Contents

1 × 3-Pin Female Connector (211PC032S0049) with 22 AWG wire and terminal insert