1-Way Yazaki 6.3mm Connector Pigtail – 7283-3013-10 / 90980-11184 / Mopar 68486185AAC

Direct-fit replacement for Yazaki / Toyota / Mopar OEM part numbers 7283-3013-10 (Yazaki), 90980-11184 (Toyota OEM), and 68486185AAC (Mopar / Chrysler), a 1-way (single-pin) 6.3mm pitch connector pigtail used for high-current single-circuit connections. This connector is used across Toyota, Chrysler, Dodge, and Jeep platforms for relay outputs, fan motor feeds, and high-draw accessory circuits.

Key Specifications

• OEM Part Numbers: 7283-3013-10 (Yazaki) / 90980-11184 (Toyota) / 68486185AAC (Mopar)
• Pin Count: 1 (single-way)
• Terminal Pitch: 6.3mm
• Wire Gauge: 18 AWG (0.5 mm²)
• Wire Length: 5.5 inches (140 mm)
• Housing Material: PA66 glass-filled nylon
• Terminal Material: Copper alloy, tin-plated
• Current Rating: Up to 20A per pin
• Voltage Rating: 12V / 24V DC

Three OEM Part Numbers – Same Connector

• 7283-3013-10: Yazaki manufacturer part number (female socket, 6.3mm, 1-way)
• 90980-11184: Toyota OEM service catalog number for the same connector
• 68486185AAC: Mopar (Chrysler/Dodge/Jeep) OEM part number – used on shared Yazaki-sourced harness components

Applications

• Toyota relay output pigtail – main relay, fuel pump relay, cooling fan relay
• Chrysler / Dodge / Jeep relay harness – single-circuit high-current connection
• Cooling fan motor single-pin power feed
• Fuel pump relay output connector
• High-draw accessory single-circuit harness repair

Frequently Asked Questions

Q: Are 7283-3013-10, 90980-11184, and 68486185AAC all the same connector?
A: Yes. All three part numbers reference the identical 1-way 6.3mm Yazaki female socket connector. 7283-3013-10 is the Yazaki manufacturer number; 90980-11184 is the Toyota OEM service number; 68486185AAC is the Mopar OEM service number for the same component sourced from Yazaki.

Q: What is the mating male connector?
A: The mating male plug is 7282-3013-10 (Yazaki 1-way 6.3mm male). In the Yazaki 7282/7283 series, 7282 always denotes the male plug and 7283 always denotes the female socket.

Q: What wire gauge should I use for a 20A circuit?
A: For 20A continuous load, use a minimum of 14 AWG (2.0 mm²) wire. The pre-installed 18 AWG wire is suitable for circuits up to 10A – for higher current applications, splice to the appropriate gauge wire.

Package Contents

1 × 1-Way Female Connector Pigtail (7283-3013-10 / 90980-11184 / 68486185AAC) with 18 AWG wire