{"product_id":"cat5e-cat6-rj45-connectors-gold-plated-100pcs-gigabit-ethernet","title":"Cat5e \/ Cat6 RJ45 Connectors Gold Plated 100pcs – Gigabit Ethernet 100M\/1000Mbps Network Cable Plug","description":"\u003ch2\u003eCat5e \/ Cat6 RJ45 Connectors Gold Plated 100pcs – Gigabit Ethernet 100M \/ 1000Mbps\u003c\/h2\u003e\n\n\u003cp\u003eGold-plated 8P8C (RJ45) modular plugs for field termination of Cat5e and Cat6 Ethernet cables. These connectors are used to terminate bulk Ethernet cable into patch cables, wall outlet pigtails, and custom-length network runs. Gold plating on the 8 contacts provides corrosion resistance and stable contact resistance across the connector’s service life — critical for maintaining Gigabit (1000BASE-T) and Fast Ethernet (100BASE-TX) signal integrity. Supplied in a 100-piece bulk pack for structured cabling projects, IT infrastructure work, and network installation contractors.\u003c\/p\u003e\n\n\u003ch3\u003eKey Specifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e 8P8C (8 Position 8 Contact) — commonly called RJ45\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCable Compatibility:\u003c\/strong\u003e Cat5e (up to 1Gbps \/ 100m), Cat6 (up to 10Gbps \/ 55m)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eContact Plating:\u003c\/strong\u003e Gold-plated (50μin minimum over nickel underplate)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eContact Material:\u003c\/strong\u003e Phosphor bronze\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHousing Material:\u003c\/strong\u003e Polycarbonate (transparent)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWire Gauge:\u003c\/strong\u003e 24AWG solid or stranded (verify for your cable type)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpeed Rating:\u003c\/strong\u003e 100M \/ 1000Mbps (Gigabit Ethernet)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 100 pieces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSolid Core vs Stranded Cable — Critical Connector Compatibility\u003c\/h3\u003e\n\u003cp\u003eThis is the most common source of failed RJ45 terminations:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSolid core cable:\u003c\/strong\u003e Each conductor is a single solid copper wire. Used for in-wall and structured cabling runs. Requires a connector with \u003cstrong\u003esolid core contacts\u003c\/strong\u003e — the IDC (insulation displacement contact) blade pierces the solid wire.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStranded cable:\u003c\/strong\u003e Each conductor is multiple fine copper strands twisted together. Used for patch cables and flexible applications. Requires a connector with \u003cstrong\u003estranded contacts\u003c\/strong\u003e — the IDC blade grips the stranded bundle differently.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUsing the wrong connector type causes:\u003c\/strong\u003e High contact resistance, intermittent link failures, and reduced cable category performance. Always match the connector type to the cable construction.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUniversal connectors\u003c\/strong\u003e (compatible with both solid and stranded) are available but typically cost more.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eT568A vs T568B Wiring Standard\u003c\/h3\u003e\n\u003cp\u003eRJ45 connectors must be wired to a consistent pin assignment standard. The two standards are:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eT568B (most common in North America):\u003c\/strong\u003e Pin order: Orange-White, Orange, Green-White, Blue, Blue-White, Green, Brown-White, Brown\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eT568A (used in some government and international installations):\u003c\/strong\u003e Pin order: Green-White, Green, Orange-White, Blue, Blue-White, Orange, Brown-White, Brown\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRule:\u003c\/strong\u003e Use the same standard on both ends of a straight-through cable. Use T568A on one end and T568B on the other for a crossover cable (rarely needed with modern auto-MDI\/X switches).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat Questions Does This Product Answer?\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cem\u003e\"Do I need a special crimping tool for RJ45 connectors?\"\u003c\/em\u003e — Yes. An RJ45 crimp tool (8P8C die) is required. Do not use pliers — uneven crimping force causes individual contacts to seat at different depths, resulting in intermittent connections. A pass-through crimp tool (where the wires extend through the front of the connector during crimping) is recommended for beginners as it simplifies wire alignment.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cem\u003e\"Why does my Gigabit connection drop to 100Mbps after termination?\"\u003c\/em\u003e — Common causes: (1) wires not fully seated to the front of the connector before crimping; (2) wrong connector type for solid vs stranded cable; (3) untwisted wire length exceeds 13mm (Cat6 limit) before the connector; (4) damaged or crossed wire pairs. Re-terminate and test with a cable tester.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cem\u003e\"What is the maximum untwisted length before an RJ45 connector?\"\u003c\/em\u003e — Cat5e: 13mm maximum. Cat6: 13mm maximum. Exceeding this limit increases crosstalk and reduces the cable’s ability to support Gigabit speeds over longer runs.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cem\u003e\"Can I use Cat5e connectors on Cat6 cable?\"\u003c\/em\u003e — Physically yes, but not recommended. Cat6 cable has a larger diameter and a plastic spine (spline) separating the pairs. Cat6-specific connectors have a wider channel to accommodate the larger cable OD and the spline. Using Cat5e connectors on Cat6 cable often results in the cable not seating properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStructured cabling:\u003c\/strong\u003e Terminating in-wall Cat5e\/Cat6 runs to patch panels and wall outlets\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCustom patch cables:\u003c\/strong\u003e Building exact-length patch cables for server racks and network closets\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eField repairs:\u003c\/strong\u003e Re-terminating damaged cable ends on installed network runs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHome networking:\u003c\/strong\u003e Running Ethernet to rooms, gaming setups, and home office installations\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIP camera systems:\u003c\/strong\u003e PoE camera cable termination, NVR connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cp\u003e100 × gold-plated 8P8C (RJ45) modular plugs. Strain relief boots not included (sold separately).\u003c\/p\u003e","brand":"Cable Parts Online","offers":[{"title":"CAT-5E \/ 1 Box","offer_id":47850771120373,"sku":"14:200004889#CAT-5E ;200001249:202408830#1 Box","price":38.5,"currency_code":"USD","in_stock":true},{"title":"CAT-6E \/ 1 Box","offer_id":47850771153141,"sku":"14:200004890#CAT-6E ;200001249:202408830#1 Box","price":44.8,"currency_code":"USD","in_stock":true},{"title":"CAT-6E-Shield \/ 1 Box","offer_id":47850771185909,"sku":"14:200004891#CAT-6E-Shield;200001249:202408830#1 Box","price":62.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3494\/0149\/files\/Sf51ce967a7344de1aa129d107081a288K.webp?v=1773899661","url":"https:\/\/www.csldmcml.com\/products\/cat5e-cat6-rj45-connectors-gold-plated-100pcs-gigabit-ethernet","provider":"Cable Parts Online","version":"1.0","type":"link"}